Tac 47 Industries http://www.tac47industries.com/content-categories/cat-280_283/receiver_block.html Tue, 22 May 2012 14:41:54 -0500 en The ACE Internal Receiver Block requires modification to the receiver; i.e.. the tang on the back of the receiver must be cut off then filed or ground smooth. The internal receiver block will then simply bolt into the receiver. It will be connected at the stock screw hole on the inside of the receiver and the pistol grip "T" nut will hold the front of the receiver block. There is no movement to the receiver block once it is installed. Fits most common stamped receivers, 1mm and 1.6mm. http://www.tac47industries.com/content-product_info/product_id-2168/ak_internal_receiver_block.html http://www.tac47industries.com/images/products/AK Internal Receiver Block.jpg http://www.tac47industries.com/content-product_info/product_id-2168/ak_internal_receiver_block.html For all common stamped receiver AK's. Such as Chinese Type 56 and MAK 90, Romanian SAR, Hungarian, Russian/ Siaga, Egyptian Maadi. Length extends 1.535" 'from the back edge of receiver' (F.B.E.R.) AKRBU is drilled and tapped in two places to allow the stock to be mounted higher for use with optical sights. Includes a 1 1/4" sling mount which can be mounted on the left or right of the rifle. Weight 180g ( 6.42 oz) http://www.tac47industries.com/content-product_info/product_id-2055/ak_47_stamped_receiver_no_mod_block.html http://www.tac47industries.com/images/products/AK Universal Receiver Block.jpg http://www.tac47industries.com/content-product_info/product_id-2055/ak_47_stamped_receiver_no_mod_block.html Drilled and tapped for a sling mount. Includes 1 1/4" sling mount. For use with ACE receiver blocks that do not have a sling mount, like HK MP5KPDW, or MP5. http://www.tac47industries.com/content-product_info/product_id-2169/folding_stock_mechanism_smg.html http://www.tac47industries.com/images/products/FSMSMG.jpg http://www.tac47industries.com/content-product_info/product_id-2169/folding_stock_mechanism_smg.html Folding Mechanism with integrated AR15 type Stock interface. Now any AR type stock can be mounted on any receiver block that ACE makes. That includes AR15, AR stubby stocks, ACE ARFX-E, M.P. PRS, etc. http://www.tac47industries.com/content-product_info/product_id-2145/folding_mechanism_with_integrated_ar15_stock_interface.html http://www.tac47industries.com/images/products/Folding Mechanism with integrated AR15 Stock Interface.jpg http://www.tac47industries.com/content-product_info/product_id-2145/folding_mechanism_with_integrated_ar15_stock_interface.html If you already have an M4 or CAR stock use thes parts to attach to your AK. Includes all parts and hardware to mount it to your stamped AK. Includes: AKRBU Universal Receiver block (AKRBU-PN), Pig Nose (PN), lock ring, and 1 1/4" ambi sling mount. http://www.tac47industries.com/content-product_info/product_id-2182/universal_receiver_block_with_car_stock_adapter.html http://www.tac47industries.com/images/products/Universal Receiver Block with CAR Stock Adapter.jpg http://www.tac47industries.com/content-product_info/product_id-2182/universal_receiver_block_with_car_stock_adapter.html US made. Includes all mounting hardware. http://www.tac47industries.com/content-product_info/product_id-2180/saiga_rifle_and_shotgun_receiver_block_grip_and_sling_mount.html http://www.tac47industries.com/images/products/Saiga Rifle and Shotgun Receiver Block, Grip and Sling Mount.jpg http://www.tac47industries.com/content-product_info/product_id-2180/saiga_rifle_and_shotgun_receiver_block_grip_and_sling_mount.html http://www.tac47industries.com/content-product_info/product_id-2176/hk_91_receiver_block.html http://www.tac47industries.com/images/products/HK 91 Receiver Block.jpg http://www.tac47industries.com/content-product_info/product_id-2176/hk_91_receiver_block.html This is the new 2006 Daewoo Receiver lock. This grip uses the ACE US-Made Daewoo K2 style pistol grip (sold separately) http://www.tac47industries.com/content-product_info/product_id-2174/daewoo_dr200_300_receiver_block.html http://www.tac47industries.com/images/products/Daewoo DR200 & 300 Receiver Block.jpg http://www.tac47industries.com/content-product_info/product_id-2174/daewoo_dr200_300_receiver_block.html Modification to receiver is necessary. The stock support must be cut down to approximately .450" then the AR180BB securely installs with one screw. http://www.tac47industries.com/content-product_info/product_id-2173/ar180_receiver_block.html http://www.tac47industries.com/images/products/AR180 Receiver Block.jpg http://www.tac47industries.com/content-product_info/product_id-2173/ar180_receiver_block.html The ARRB-C is a compact receiver block designed to screw into any receiver or receiver block that has an AR15 type stock interface. Particularly receivers with a "threaded whole only", and not the full "tear-drop" type interface found on AR15 receivers; for example: SAGE M14 stocks, and many tactical shotgun adapters. The ARRB-C screws inside said receiver, then, by tightening two screws, the threads expand and lock the ARRB-C in place. It can be used with or with out a CAR plate. There is no lock nut necessary, enabling the folding mechanism to mount directly against the receiver, for a integrated look. http://www.tac47industries.com/content-product_info/product_id-2172/ar_compact_receiver_block.html http://www.tac47industries.com/images/products/AR Compact Receiver Block.jpg http://www.tac47industries.com/content-product_info/product_id-2172/ar_compact_receiver_block.html This receiver block allows for the use of any ACE stock on a MAC 9/11 or variant, Including a MPA. http://www.tac47industries.com/content-product_info/product_id-2057/m11_9_receiver_block.html http://www.tac47industries.com/images/products/M11 9 Receiver Block.jpg http://www.tac47industries.com/content-product_info/product_id-2057/m11_9_receiver_block.html Yugoslavian AK Stock Adapter Block. Fits Mitchell arms M70 and M90, as well as all other Yugo AK's with the original "no tang" stock interface ("rear trunion"). http://www.tac47industries.com/content-product_info/product_id-2181/yugoslavian_ak_stock_adapter_block.html http://www.tac47industries.com/images/products/Yugoslavian AK Stock Adapter Block.jpg http://www.tac47industries.com/content-product_info/product_id-2181/yugoslavian_ak_stock_adapter_block.html An ACE Exclusive! Robinson Armament VEPR Receiver Blocks are finally in! These VEPR receiver blocks have clearance machined in to it to fit the Krebs customized VEPR's (KTR). Will not fit early wooden thumb hole type VEPR's. This receiver block extends 1/8" (.125") from the back edge of receiver. Use this information to determine the over-all length of the stock needed to meet your requirements. Note: you must cut off the tang on the receiver to install this receiver block. http://www.tac47industries.com/content-product_info/product_id-2179/robinson_armament_vepr_receiver_block.html http://www.tac47industries.com/images/products/Robinson Armament VEPR Receiver Block.jpg http://www.tac47industries.com/content-product_info/product_id-2179/robinson_armament_vepr_receiver_block.html Heckler Koch 94 Receiver Block fits the HK 94 and MP5 variants only. Can be modified to fit other HK clones. Modification does void warranty. Use SMG Folding Stock Mechanism (#FSM-SMG) with sling mount for folding stock applications with this #HK94RB reciver block. Includes durable elastomer buffer. Any ACE Modular fixed or folding stock will mount to this receiver block. Length 3/8" Weight 90g (3.2 oz) http://www.tac47industries.com/content-product_info/product_id-2178/hk_94_receiver_block.html http://www.tac47industries.com/images/products/HK 94 Receiver Block.jpg http://www.tac47industries.com/content-product_info/product_id-2178/hk_94_receiver_block.html Heckler Koch 93 Receiver Block fits the HK 93 variants only. Can be modified to fit other HK clones. Modification does void warranty. Use SMG Folding Stock Mechanism (#FSM-SMG) with sling mount for folding stock applications with this #HK93RB receiver block. Made from injection molded Zytel polymer. Includes durable elastomer buffer. Any ACE Modular fixed or folding stock will mount to this receiver block. Length 3/8" Weight 90g (3.2 oz) http://www.tac47industries.com/content-product_info/product_id-2177/hk_93_receiver_block.html http://www.tac47industries.com/images/products/HK 93 Receiver Block.jpg http://www.tac47industries.com/content-product_info/product_id-2177/hk_93_receiver_block.html