Tac 47 Industries http://www.tac47industries.com/content-categories/cat-274_271/ak_47_receivers_parts.html Tue, 22 May 2012 14:34:25 -0500 en http://www.tac47industries.com/content-categories/cat-274_271_303/receiver_parts.html Now available for ordering are the new M92 flats that will have all of the holes in the correct placement for the trigger guard. The front trunnion holes will not be stamped, but the rear ones will be. The flats will have all of the standard dimples and the magwell will be the same width from front to back so they can be cut out for any caliber. To finish these flats you will need to buy a 5mm and 7mm reamer. Or at least get drill bits of that size to open up the holes in the flats once they are bent. At the same time you order the reamers buy 4mm (or 5/32) screw machine drill bits for drilling the trunnion holes. The rear trunnion holes are 4.5mm. Try not to buy the cheap import drill bits for drilling the trunnion holes. http://www.tac47industries.com/content-product_info/product_id-1953/yugo_m92_ak_47_7_62x39_receiver_flat.html Made in the U.S.A. **Now BATF Approved Accepts single or double hook triggers Constructed from 4130 carbon steel 1.50mm thick Comes in a softened state...once formed it must be heat treated and hardened All holes are pre-drilled to the correct sizes Magazine opening may require fitting http://www.tac47industries.com/content-product_info/product_id-1952/yugo_ak_underfolder_receiver_flat.html AK Receiver Flat and Rails New improved hole locations designed to original production specifications. This new design features precut notches to accommodate the bolt carrier. Now has precut notches to accept the bolt carrier. This flat will have the trunnion holes drilled. This flat is a great start to any AK rifle build. It is constructed from high strength 4130 carbon steel to an exact 1.05mm thickness. Flats accept single and double hook triggers. . All are pre-drilled to the correct sizes to ensure a precise build. The flat arrives from the factory in a softened state and once formed it must be heat treated and hardened. Our flats are compatible with both the AK47 and AK74. NOTE: Receiver flats that have been bent in any way could constitute as a firearm and are non-returnable. Please verify your local and state laws before making the bends http://www.tac47industries.com/content-product_info/product_id-1951/tapco_improved_ak_receiver_flat_and_rails.html Complete Standard Stock Rivet Set With Center Support Bushing Made By Tapco http://www.tac47industries.com/content-product_info/product_id-1954/tapco_ak_cross_member_bushing_rivet_combo.html This is an image of the new Polish Under folder flat, made by AK-Builder. Each flat will come with a set of rails with mag stabilizers on each side. These are stamped from raw materials and are NOT modified flats from any other manufacturer. This flat will not work with the Yugo M70, Yugo M92 or Romanian under folder rear trunnion http://www.tac47industries.com/content-product_info/product_id-1961/ak_47_polish_underfolding_receiver_flat.html MK IV: While the standard AK selector lever is well designed for the function it performs, it 's operation does require the shooter to remove the firing hand from the pistol grip. The Krebs Custom AK selector lever allows for manipulation of the selector while maintaining the shooting hand in firing position, as well as provides a notch for locking back the bolt for inspection. A one for one replacement of the OEM part. http://www.tac47industries.com/content-product_info/product_id-2126/enhanced_ak_selector_levers.html http://www.tac47industries.com/images/products/ENHANCED AK SELECTOR LEVERS.jpg http://www.tac47industries.com/content-product_info/product_id-2126/enhanced_ak_selector_levers.html