Tac 47 Industries

SAFETY SELECTOR LEVER KREBS ENHANCED FOR SAIGA, AK47

KREBS CUSTOM GUNS Works on all Saiga Shotguns and Rifles. While the standard AK selector lever is well designed for the function it performs, it's operation does require the shooter to remove the firing hand from the pistol grip. The Krebs Custom AK selector lever allows for manipulation of the selector while maintaining the shooting hand in firing position, as well as provides a notch for locking back the bolt for inspection. Made in the USA KREBS

AK Internal Receiver Block

The ACE Internal Receiver Block requires modification to the receiver; i.e.. the tang on the back of the receiver must be cut off then filed or ground smooth. The internal receiver block will then simply bolt into the receiver. It will be connected at the stock screw hole on the inside of the receiver and the pistol grip "T" nut will hold the front of the receiver block. There is no movement to the receiver block once it is installed. Fits most common stamped receivers, 1mm and 1.6mm.

AXIS PIN RETAINING SPRING- SHEPERDS CROOK

AXIS PIN RETAINING SPRING-SHEPERDS CROOK Holds the axis pins in the receiver Easy to install Slides over back trigger pin and under front hammer pin to lock Axis pins in place Great for all Saiga conversions

Tromix Stock

Tromix Stock - Made in US.

Tromix Do-It-Yourself Saiga 12 Trigger Guard

Tromix Do-It-Yourself, bolt on Saiga-12 trigger guard, grip nut, and safety stop all in one unit. Threaded inserts will be shot into the three holes. To install, just tear off the OEM trigger plate, knock out the old rivets and and screw this in place. You can have your pistol grip conversion done in about 5 minutes with this part. in stock shipping with in 24 hours

Tromix Bolt on Charging handle

TROMIX-Bolts on to the existing charging handle This will work on all Saiga Rifles, Shotguns and AK 47's Slips over the existing charging handle and then tighten the set screw Red Loctite on the set screw is recommended Made in the USA

Tromix Saiga 12 Hand Guard

Tromix S-12 Handguard to replace factory forearm on the Saiga 12 gauge- US Made

Saiga S12 IZ109

We distribute direct from the importer. We pass the savings on to you or your business. Please contact us for wholesale orders. This is a new IZ109 S12s. Please do not select USPS on any firearm we do not ship USPS on firearms. Please Send you FFL to FFL@tac47industries.com. if you send in your FFl please referance your name and order number. For special Canx order there is a 20% non refundible deposit. All firearms sales are final.

Saiga 7.62x39

In Stock 16 chrome-lined barrel Semi-auto 7.62x39 caliber 3-scale sight leaf sights Black synthetic stock Includes Sling Studs, Cleaning Tools, Oil Bottle, Manual, and (1) 10d Mag

Tac 47 A.K.A AUTO PLUG

The leader in gas utilization and regulation technology, resulting in a major increase in Saiga 12 reliability and longevity, freedom of ammo choice, and convenience. its an amalgamation of efficiency and automatic setting free regulation of the Saiga 12 Gas System. The Auto Plug tm takes the place of the factory Gas Adjustment Plug. It eliminates the need to manually change settings by automatically regulating the operations gas utilization. It maximizes the efficiency of the Saiga 12 Gas System. Its helps under gassed guns cycle more reliably and also regulates and releases excess gas pressure form High Brass and self defense ammo harmlessly into ambient pressure zone. AUTO PLUGS ARE CURRENTLY ON BACK ORDER AND WILL BE READY ON FEB 23. For Instructions click link TAC CLICK HERE FOR AUTO PLUG INSTRUCTIONS OR Paste https://acrobat.com/#d=Xu2SFVTAcqJDf8D8LS9ltw

ProMag Saiga 12ga 12RD Drum

ProMag magazine bodies are constructed of high carbon heat-treated steel and TIG-welded for strength. The springs are precision wound using heat-treated chrome silicon wire. Bases and followers are injection molded from polymers selected for their durability. The result is quality, consistency, durability and reliability.

AKFX Non-Folding Skeleton Stock with Internal Receiver Block

Fixed, non-folding AKFX skeleton stock. Includes all parts and hardware to mount it to your stamped AK. Internal Receiver block (AKRBC), Skeleton stock AKFX(specify length), and a 1/2" recoil pad. Does not include Folding Stock Mechanism. No provision to attach a sling mount.. AKFX (S) standard length, Weight: .86 lbs. (393g) NOTE: Side folding model shown in pictures. Folding mechanism NOT included.

AKFX Non-Folding Skeleton Stock (No Mod)

Fixed, non-folding AKFX skeleton stock. Includes all parts and hardware to mount it to your stamped AK. Universal Receiver block (AKRBU), Skeleton stock AKFX(specify length), 1 1/4" ambi sling mount and recoil pad.

AKFX Folding Skeleton Stock (No Mod)

ACE's famous AKFX folding skeleton stock. Includes all parts and hardware to mount it to your stamped AK. AKRBU Universal Receiver block (AKRBU), folding stock mechanism (FSM), Skeleton stock AKFX(specify length), 1 1/4" ambi sling mount and recoil pad. All ACE folding stocks have 3/8" vertical adjustment and can be set up to fold left or right. Also, can be set up so that the charging handle "clears" the stock so that the weapon can be fired even with the stock folded.

AK-47 (Stamped Receiver, No-Mod Block)

For all common stamped receiver AK's. Such as Chinese Type 56 and MAK 90, Romanian SAR, Hungarian, Russian/ Siaga, Egyptian Maadi. Length extends 1.535" 'from the back edge of receiver' (F.B.E.R.) AKRBU is drilled and tapped in two places to allow the stock to be mounted higher for use with optical sights. Includes a 1 1/4" sling mount which can be mounted on the left or right of the rifle. Weight 180g ( 6.42 oz)

TAC-47 G2 Moddified FCG

TAC 47 Industries moddifed G2 single hook trigger, has been Machined, and custom fit and polished all contact surfaces for a crisp smooth pull trigger pull, to make a drop in replacment for your Saiga 12. This trigger group has a 3.5-4 pound trigger pull, Whether you are replacing your trigger group to give the right number of American pieces for a pistol grip stock or just looking for the best trigger pull, this fire control group is the choice for you. It is guaranteed to drop in with a great fit and function on your rifle. Counts As 3 US Compliance Parts.

Tromix Shark Brake for Saiga 12

Tromix Shark Brake for Saiga 12 - Screws onto factory threads. Made in United States

TAC-47 G2 Moddified FCG

Saiga 12 Ga SureFire Gun Mags 12 Rnd Magazine

Saiga 12 Ga SureFire Gun Mags 12 Rnd Magazine Surefire Saiga 12 gauge 12 round magazines. The highest capacity stick magazine on the market. Made in USA and counts as 3 component US parts.

TAPCO AK-47 Saw Style Grip

Molded after the M249 military issue SAW Ergonomic angle offers better comfort Comes standard with a storage compartment door Constructed from military grade composite U.S. Sec. 922r compliant part Made in the U.S.A. Marked U.S.A. Lifetime warranty. Please specify black, OD green or tan.

The Chaos Barrel Nut

The Chaos Barrel Nut allows Fast & Easy orientation of muzzle devices. * 12L14 Steel * Heat Treated and Black Oxodized

SAIGA 12 PHANTOM FLASH HIDER DOOR BREACH

This muzzle attachment is designed to thread onto the original threads on the Saiga 12 gauge. The Flash Hider/Door Breach is approximately 3" long made out of heat treated 4140 with a black oxide finish. Made in the USA We highly recommend the "Saiga 12 Barrel Nut" to allow for easy secure installation and removal of Muzzle Brakes and Flash Hiders. Barrel Nut sold separately. DPH ARMS

Hogue Monogrip Pistol Grip for AK / Saiga - Black - Hogue

Hogue Monogrip Finger Groove Pistol Grip for AK / Saiga Hogue's rubber OverMolded Grip feel soft and resilient in your hand, you are molded with super strong but lightweight reinforcing inserts which directly engage with the rifle action for a rock-soldi grip fit. this is one of the best pistol grips for the Saiga 12 Shotgun.

KREBS CUSTOM SAIGA 12 COMBAT SHOTGUN SIGHTS

Saiga 12 Combat Sights. Front sight is made from 1018 case hardened steel, clamps on barrel and features an AR-15 front post and detent

Tac 47 A.K.A AUTO PLUG

The leader in gas utilization and regulation technology, resulting in a major increase in Saiga 12 reliability and longevity, freedom of ammo choice, and convenience. its an amalgamation of efficiency and automatic setting free regulation of the Saiga 12 Gas System. The Auto Plug tm takes the place of the factory Gas Adjustment Plug. It eliminates the need to manually change settings by automatically regulating the operations gas utilization. It maximizes the efficiency of the Saiga 12 Gas System. Its helps under gassed guns cycle more reliably and also regulates and releases excess gas pressure form High Brass and self defense ammo harmlessly into ambient pressure zone. For Instructions click link TAC CLICK HERE FOR AUTO PLUG INSTRUCTIONS OR Paste https://acrobat.com/#d=Xu2SFVTAcqJDf8D8LS9ltw

Folding Stock Mechanism SMG

Drilled and tapped for a sling mount. Includes 1 1/4" sling mount. For use with ACE receiver blocks that do not have a sling mount, like HK MP5KPDW, or MP5.

FIRING PIN SAIGA 12 TROMIX

Tromix Heavy Hitter Firing Pin for the Saiga 12 Made in the USA. TROMIX

Saiga / AK Side Folding Stock Kit

Push button side folding stock for use on the Saiga and AK type rifles or shotguns with stamped receiver. This is a complete kit that includes a stock, a rubber pad, an adapter block, and screws.

custom gun

Products Qty. Total BUILD YOUR OWN Saiga 12 CONVERSION ($399.00) Who supplied Shotgun: Customer Supplied Stock: MAKO RECOIL GL SHOCK (+$99.00) MAGAZINES AND DRUMS: SGM TACTICAL 12 RD (+$39.00) RECIEVER MOD FOR FOLDING STOCKS: CUSTOM TIG WELD RECEIVER A+ (+$45.00 x 1) FOLDING MECH: ACE AR INTERFACE FOLDING MECH (+$75.00 x 1) Pistol Grip: HOUGE PG (+$19.99 x 1) Trigger Guard: MAG 10 MAGWELL TRIGGER GUARD COMBO (+$169.00 x 1) CHARGING HANDLE: GALIL WELD ON CHARGING HANDLE (+$90.00 x 1) HANDGUARD: CHAOS H&K QUAD RAIL (+$199.00 x 1) MUZZLE BREAK: TROMIX FLASH HIDER (+$80.00 x 1) FORWARD GRIP: AFVG2 (35.00) Texas Weapons System Dogleg Rail (130.00) AKM Rear Sight Base (250.00) BARREL LENGTH: SNUB SERVICE 18.25 INCLUDING BREAK LENGTH (+$99.00 x 1) SIGHT OPTIONS: H&K SIGHTS WITH XS TRITIUM SYSTEM (+$270.00 x 1)

BUILD YOUR OWN Saiga 12 CONVERSION

*#Saiga Conversion Services Listed and included* This is a Chance to Build your Own Saiga Conversion right here online. Please allow Tac 47 Industries 10 weeks for your custom Saiga Conversion. Here is what you get with your Saiga Conversion. This is a custom built TAC-47 original Saiga 12 gauge conversion. It has been converted professionally with attention to even the smallest detail. The entire piece has been parkerized, sand blasted and teflon coated to offer a long-lasting durable finish. TAC-12 BYOS TAC Modified G2 or Tx Trigger FCG. Machined, and custom fit and polished all contact surfaces for a crisp smooth pull. Tac 47 Trigger guard. Saiga Conversion Gas Function service, Gas block aliened as required. Bolt and Carrier re-machined. Extractor Tuned. Holes Tig welded and blended for a custom clean look Tac 47 Custom Selector Stop Sandblasted with aluminum oxide . Professionally Parkerized Coated in Teflon. All parts purchased from Tac 47 Industries will be installed for free on your BYOS Saiga Conversion Please Allow 12-14 Weeks for custom build.

TAC-12 1WS

TAC-12 1WS One Wicked Scattergun PICTURED TAC-12 1WS IS WITH ADDITIONAL OPTIONS Receiver being machined at proper degree of angle and back plate Professionally Tig welded, smoothed and blended, you will not be able to see where the receiver ends and the plate begins. These below come standard on the TAC-12 1WS TAC Modified G2 FCG machined, and custom fit and polished all contact surfaces for a crisp smooth pull. Galli pistol grip installed. ACE skeleton Stock installed The DPH Brake TAC 47 trigger guard. Install folding mechanism Function service, Gas block aligned as required. TACTRITION SERVICE. Holes TIG welded and blended. You will never know they were there Install plastic handguard Kvar, surfire. Sandblasted with aluminum oxide . Professionally Parkerized and Teflon Coated. Gun shown with Available Options please specify what additional options you are ordering in the remarks, you will be billed the listed price for the additions Options Available Tromix Shark Break $60 Tromix Skeleton Stock $45 Tromix Limb Saver $65 Tromix Flash Hider $60 Galil Charging handle $90 Ace Push button folding mech $49 KA tappet $40 DPH tri rail $ 99 H&K Sights $150 Chaos Quad Rail $130

Tac 47 Slug Slinger

TAC Modified G2 FCG. Machined, and custom fit and polished all contact surfaces for a crisp smooth pull trigger pull lightened and adjusted for over travel. Gallil pistol grip installed. Command Arms collapsible stock installed TAC Custom Trigger guard and Safety selector stop. bolt assembly, smoothed action. Function service, Gas block aligned, gas ports enlarged and corrected. Holes TIG welded and blended. install Auto Plug install Chaos H&K Friendly Quad install Chaos Warthog Gallil style Charging handle Customize and install shotgun for rear AK 47 sight base Install Krebs rail system and aperture Shorten barrel and tig weld Chaos Warthog: Making this shot gun the shortest legal length with permanently attached muzzle device. Sandblasted with aluminum oxide . Professionally Parkerized. Options Available XS Sights - Tritium Front, Ghost Ring Rear $120

Folding Mechanism with integrated AR15 Stock Interface

Folding Mechanism with integrated AR15 type Stock interface. Now any AR type stock can be mounted on any receiver block that ACE makes. That includes AR15, AR stubby stocks, ACE ARFX-E, M.P. PRS, etc.

TROMIX FOLDING CONVERSION KIT

Conversion Kit a includes everything for your basic conversion and to be 922r compliant Kit includes-G2 Modified by Tac 47 "Fire Control Group", Tromix DIY Trigger guard , Nylon Hole Plugs, TROMIX SKELETON Stock and b plate, ACE side folding mech, Tapco SAW Grip in your choice of color Please Take a look at all the parts that also can tune up your saiga. All In stock items Ship same day if your order is placed before 2pm.

Nylon hole plugs

These plugs are great when you want to cover up your old Axis rivet holes. They snap in place.

TROMIX CONVERSION KIT

Conversion Kit a includes everything for your basic conversion and to be 922r compliant Kit includes-G2 Modified by Tac 47 "Fire Control Group", Tromix DIY Trigger guard , Nylon Hole Plugs, TROMIX SKELETON Stock, Tapco SAW Grip in your choice of color Please Take a look at all the parts that also can tune up your saiga. All In stock items Ship same day if your order is placed before 2pm.

Conversion Kit Kilo MAG 10

Conversion Kit a includes everything for your basic conversion and to be 922r compliant Kit includes-G2 Modified by Tac 47 "Fire Control Group",TAC 47 MAGWELL TRIGGER GUARD COMBO "MAG 10" , Nylon Hole Plugs, Kvar Nato length AK stock or Warsaw Length, Tapco SAW Grip in your choice of color.

Conversion Kit Echo MAG 10

Conversion Kit a includes everything for your basic conversion and to be 922r compliant Kit includes-G2 Modified by Tac 47 "Fire Control Group", TAC 47 MAGWELL TRIGGER GUARD COMBO "MAG 10" , Nylon Hole Plugs, Intergrated Internal Receiver block, ACE Skeleton Stock, Tapco SAW Grip in your choice of color.

Conversion Kit Delta MAG 10

Conversion Kit Charile MAG 10

Conversion Kit Bravo MAG 10 MAGWELL

Conversion Kit Alpha MAG 10

Conversion Kit a includes everything for your basic conversion and to be 922r compliant Kit includes-G2 Modified by Tac 47 "Fire Control Group", TAC 47 MAGWELL TRIGGER GUARD COMBO "MAG 10" , Nylon Hole Plugs, Tapco AK Original Stock, Tapco SAW Grip in your choice of color Please Take a look at all the parts that also can tune up your saiga. All In stock items Ship same day if your order is placed before 2pm.

Conversion Kit MAG 10 "Magpul"CTR

Two weeks out on the mag well. Kit includes-G2 Modified by Tac 47 "Fire Control Group", Tac 47s MAGWELL TRIGGER GUARD COMBO , Nylon Hole Plugs, Magpul CTR, CAA poly tube, Tapco SAW Grip in your choice of color.

Conversion Kit Kilo

Conversion Kit a includes everything for your basic conversion and to be 922r compliant Kit includes-G2 Modified by Tac 47 "Fire Control Group",Tromix Trigger guard , Nylon Hole Plugs, Kvar Nato length AK stock or Warsaw Length, Tapco SAW Grip in your choice of color.

Conversion Kit Echo

Conversion Kit a includes everything for your basic conversion and to be 922r compliant Kit includes-G2 Modified by Tac 47 "Fire Control Group", Tromix trigger guard , Nylon Hole Plugs, Intergrated Internal Receiver block, Tapco SAW Grip in your choice of color.

Conversion Kit Delta

Conversion Kit a includes everything for your basic conversion and to be 922r compliant Kit includes-G2 Modified by Tac 47 "Fire Control Group", Tromix Trigger guard , Nylon Hole Plugs, Magpul CTR Stock, CAA poly Tube, Houge Pistol Grip. In your Choice of Color

Conversion Kit Charile

Conversion Kit a includes everything for your basic conversion and to be 922r compliant Kit includes-G2 Modified by Tac 47 "Fire Control Group", Tromix triggerguard , Nylon Hole Plugs, Magpul MOE, CAA poly tube, Tapco SAW Grip in your choice of color.

Conversion Kit Bravo

Conversion Kit a includes everything for your basic conversion and to be 922r compliant Kit includes-G2 Modified by Tac 47 "Fire Control Group",Tromix trigger guard , Nylon Hole Plugs, Tapco AK T-6 Collapsible Stock, Tapco SAW Grip in your choice of color.

Conversion Kit Alpha

Conversion Kit a includes everything for your basic conversion and to be 922r compliant Kit includes-G2 Modified by Tac 47 "Fire Control Group", Tromix DIY Trigger guard , Nylon Hole Plugs, Tapco AK Original Stock, Tapco SAW Grip in your choice of color Please Take a look at all the parts that also can tune up your saiga. All In stock items Ship same day if your order is placed before 2pm.

VERTICAL GRIP - FRONT ARM SHORT

Distinctive ergonomically designed tactical vertical grips. Facilitates natural fighting stance holds on your rifle Improved performance and reaction time, reduces on target time increases muzzle control during rapid fire Ergonomically designed with finger grooves Plugged storage compartment LIFETIME WARRANTY EMA / CAA

AKFX Side Folding Skeleton Stock with Internal Receiver Block

ACE's famous AKFX folding skeleton stock. Includes all parts and hardware to mount it to your stamped AK. AKRBC Internal Receiver Block (AKRBC), folding stock mechanism (FSM-SMG), Skeleton stock AKFX(specify length), 1 1/4" sling mount and 1/2" recoil pad. Fits all common 1 mm and 1.6 mm AK receivers that are designed to accept a wood stock. Modification to your receiver is necessary. The "tang" that protrudes from the back of the receiver must be cut-off and then filed or ground flat. This folding stock can be set-up to fold left or right. There is also 3/8" of vertical adjustment in the Folding Mechanism: so the stock can be adjusted to clear the charging handle when folded to the ejection port side. AKFX (S) standard length, Weight: 1.06 lbs. (482g)

Shock Wave 1lb Exploding Target

PRODUCT INFORMATION Shockwave Exploding Rifle Targets are designed to be safe, legal, fun, and affordable! Safe: Shockwave Targets are non-flammable, non-hazardous, non-toxic, and are very stable. The only way to detonate our targets is by a .223 or higher caliber rifle round (rounds exceeding 2,200 fps). Legal: Our product has been approved by the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF), and the Consumer Product Safety Committee (CPSC) for use by civilians in the United States. For more information on the legal use of exploding rifle targets in your area, please contact your local government agency. Fun: The LOUD, CHEST-THUMPING BLAST that our targets produce is comparable to a stick of dynamite! It is hard to put the AWESOMENESS of our product into a paragraph - you just need to try one to find out for yourself! Affordable: Shockwave Targets targets retail at most sporting goods stores

DPH SKELETON 8.5" SOLID BILLET

SKU: DPH-STK DPH Original Skeleton Stock for all Saiga's and AK47's. Machined from solid aluminum billet, oxide blasted and hard anodized. This stock is the strongest and highest quality skeleton stock available. This stock requires that the FCG has been moved forward of factory setup. Bolts on to all Receiver Blocks and the Tromix weld on back plate. A Folding Mechanism can be added to easily fold your stock to one side. Made in the USA and counts for 1 US compliant part

rear Peep Sight

This Rear Peep sight makes a highly functional sight in combination with your Texas Weapon Systems Dog leg Rail. - Flip-up rear peep sight - Aperture diameter .082" - Aluminum construction 6061-T6 - Windage adjustable with set screw - Lays flat to 1/4" above rail surface

Tromix stock/With limb saver

Tromix bolt on Saiga stock with Limbsaver attached Limbesaver gives you added shooting comfort Attaches to the Tromix receiver plate or Ace internal receiver block Designed for Saiga's with a pistol grip conversion and trigger group moved forward Counts as 1 922R compliant part Made in the USA Bolts on to all Receiver Blocks and the Tromix weld on back plate. A Folding Mechanism can be added to easily fold your stock to one side.

KVAR SAIGA12 handguard

Customize your Saiga 12 with our BRAND NEW Saiga handguards designed after the battle proven RPK-74, with a twist. Arsenal Incs Lower handguards are modeled after the RPK style making them shorter than the standard Saiga handguards. Its unique system utilizes ribs designed to increase the surface area while allowing quicker cooling of the handguards. This works on Saiga 12s

DPH SKELETON 8.5" SOLID BILLET

CTR Carbine Stock Black.

The CTR is designed to be a drop in replacement carbine stock body. Adjustable for length of pull. This stock features a unique locking mech that friction locks the stock to the buffer tube for zero movement. Mounts on standard AR15/M16 carbine tubes (version for non milspec tubs also). Manufactured by: Magpul Industries Corp. CTR Carbine Stock Mil Spec OD Green

TAC-12 Chaotic Snub

TAC-12 Chaotic TAC Modified G2 FCG. Machined, and custom fit and polished all contact surfaces for a crisp smooth pull trigger pull lightened and adjusted for over travel. Gallil pistol grip installed. Tromix skeleton stock with folding stock mech installed TAC Custom Trigger guard and Safety selector stop. bolt assembly, smoothed action. Function service, Gas block aligned as required gas ports enlarged. TAC-47 T.A.R.G.E.T "AKA AUTOPLUG" A industry first, leading the way in Saiga 12 Gas regulation. All Factory Holes TIG welded and blended. Install Chaos gas puck install Chaos H&K Friendly Quad install Chaos Warthog Gallil style Charging handle Shorten barrel and tig weld Chaos Warthog: Making this shot gun the shortest legal length with permanently attached muzzle device. Sandblasted with aluminum oxide . Professionally finished.

Kvar Fixed stock.

KVAR fixed stock

TAC-12 TCS

This is a custom built TAC-47 original Saiga 12 gauge. It has been converted professionally with attention to even the smallest detail. The entire piece has been parkerized to offer a long-lasting durable finish. TAC-12 TCS CUSTOMER SUPPLIED GUN minus $550.00 TAC-12 TCS TACTICALLY CONVERTED SCATTERGUN TAC Modified G2 or Tx Trigger FCG. Machined, and custom fit and polished all contact surfaces for a crisp smooth pull. Gallil pistol grip installed. KVAR fixed stock. Tac 47 Trigger guard. Function service, Gas block aliened as required. Holes Tig welded and blended for a custom clean look Tac 47 Custom Selector Stop Sandblasted with aluminum oxide . Professionally Parkerized. Options Available Tromix Shark Break $85 Tromix Ventilated OEM Hand guards $45 Tromix Flash Hider $85

TAC-12 Chaotic Snub

Ultra-Lite Modular Non-Folding Stock

Includes all parts and hardware to mount it to your stamped AK. AKRBU Universal Receiver block (AKRBU), Ultra lite stock (designed to be cut to exact length you need), soft foam over-tube. Note: once the back of the extension tube has been cut (as shown in photo above) The machined aluminum butt can be easily removed with an allen wrench to use the space inside for storage of cleaning kit etc. 1 1/4" ambi sling mount and 1/2" recoil pad is also included. Length before cutting measured from back edge of AK's receiver to the lowest point on the curve of the butt pad = 12.6".

SAIGA 223 100RD DRUM WITH ACCESSORIES

Modified to work on all Saiga 223 rifles without a bullet guide 100rd drum keeps you shooting longer Feed rate: adjust to rate of fire of gun, exceeds 1,500 rds. / min. Fits Saiga 223 Rifles For NATO standard 5.56 mm, .223 cal. Each comes with a nylon pouch, mag loader, 2 bottles of dry graphite lube Distributed by SGM TACTICAL This product is currently on back order and will be shipped to any buyers on the day we recieve the item. Thank you for your patience.

Tac 19 SBS

Here is a Tac 47 1919 bringing you the first railed 1919 SBS. Here she is Tac 19 SBS.

Glock 27 Compact Gen 4

Compact dimensions for open and concealed carry, minimum weight despite large magazine capacity in .40 caliber. This and the reliability of the GLOCK pistol known throughout the world, which was demonstrated through tests and widespread use by US law enforcement agencies, were decisive arguments for the F.B.I. and countless police authorities for introducing the GLOCK 23 as their official service pistol. Manufacturer: Glock Model: 27 Action: Semi-automatic Type: Double Action Only Size: Compact Caliber: 40 S&W Barrel Length: 4.02" Frame/Material: Polymer Finish/Color: Matte Capacity: 9+1 Accessories: 2 Mags Fired Casing: Fired Case Hand: Right Hand Sights: Fixed Sights All handguns must go via AIR freight Only please select correct service

Auto Plug instructional video

Here is an instructional video for the auto plug.

TAPCO AK-47 Saw Style Grip

TAC 47 Industries DIY trigger guard

TAC 47 Industries Do-It-Yourself, bolt on Saiga-12 trigger guard, grip nut, and safety stop all in one unit. To install, just tear off the OEM trigger plate, Tap out rivets and and screw this in place. You can have your pistol grip conversion done in about 15 minutes with this part.

Tac Wholesale and Distributing.

If you are a dealer looking for Saiga Shotguns or Saiga Rifles Please contact me. We are a distributor for the Saiga Platform, as well as other AKM and AK style weapons. We also manufacture AR rifles and parts, as well as a full service 07/SOT for your law enforcement military needs. We are a distributor for the following manufactures. Saiga line of firearms. Tennessee Guns. Russian American Arms. Interarms AMT "hardballer" High standard Elk River Tool and Die Contact Cliff Evans Cliff@tac47industries.com 832-403-9905

Cancelations and Refunds

Refunds & Cancellations Revised 3/8/09 Return Policy: Non-Firearm Purchases: Refunds can be made on unused/unopened merchandise only. All refund requests must be made within ten calendar days from the date the order was delivered and must be received by us within fifteen days from the date of delivery. All refunds must be returned at the buyers expense and must include a return authorization number. Original shipping charges are not refundable. All refunds are subjected to a 20% restocking fee. We are not a warranty or repair provider for any manufacturer or distributor. All warranty and repair service/replacements must be obtained from the manufacturer of the item directly. If you have a problem with your item, we will provide you with contact information for the manufacturer. Firearms: All firearm sales are final. -------------------------------------------------------------------------------- Exchange Policy: Non-Firearm Purchases: Exchanges can be made on unused/unopened merchandise only. All exchange requests must be made within ten calendar days from the date the order was delivered and must be returned to us within fifteen days from the date of delivery. Exchanges can be credited up to the full purchase price of the item less shipping on both the new order and original order. Firearms: All firearm sales are final. -------------------------------------------------------------------------------- Order Cancellation Policy: You may cancel an order ONLY if you contact us prior to shipping. We ship 95% of all orders within 36 hours of being placed, so you must contact us immediately if you wish to cancel your order.

rear Peep Sight

TAC-SA SBR

A finely crafted micro SBR to fill that space on your safe door, or in a CQB situation. Manufactured with ARMORY USA made receiver and chrome lined barrel and plenty of custom engineering. ON sale reg $2250.00 no only $1750.00

TAC-SA MICRO

The TAC-ZS MICRO is a completely custom manufactured micro AK made only from the finest, materials, ARMORY USA manufactured receiver, chrome lined barrel, custom guide rod piston system. This is a one of a kind Micro masterpiece. ON SALE REG $1195.00

SAIGA CONVERSION PARTS LIST

Saiga Conversion Parts List Saiga Pistol Grip Conversion Parts List- In order to move the trigger assembly forward, you will need the following parts. "PLEASE CLICK ON PRODUCT NAME FOR AN EXAMPLE" 1. FIRE CONTROL GROUP a. TAC 47 FIRE CONTROL GROUP - Drop in ready for Pistol Grip Conversion. Includes the disconnector spring and sheapords crook. 2. Saiga 12 Trigger Guard A. TAC 47 Do It Yourself DIY Trigger Guard, bolt on Saiga-12 trigger guard, grip nut, and safety stop all in one unit. The DIY Kit is made for use with the AK STYLE pistol grip. (bolt on) 3. Pistol Grip {click here to see pistol grips} a. AK TAPCO Saw Pistol Grip available in Black and Green b. ERGO AK-47 Classic Pistol Grip in Black c. AK Original Pistol Grip - TAPCO d. ERGO AK-47 Suregrip Pistol Grip in black, coyote brown, and foliage green e. Command Arms Pistol Grip f. Hogue Monogrip Pistol Grip for AK / Saiga - Black or Green (Our Personal Favorite) 4. Rifle Stocks{click here to see Rifle Stocks} I. The following stocks fit directly onto the tang: a. TAPCO T6 Collapsible Stock (Made in USA) Not recommended b. TAPCO T6 Folding Stock (Made in USA) NoT R c. TAPCO AK Original Style Buttstock (Made in USA) Not R d. Saiga Factory Buttstock (not made in USA) e. Command Arms 6 Position CBS Stock with Aluminum Tube for AK47 Stamped Receiver (not made in USA) f. Mako AK47 6 Position Collapsible Stock W/Shock Absorber (not made in USA so 922 compliance should be considered) 2. The following stocks require cutting the tang off and grinding it flush. In order to attach a stock, you will need an Internal Stock Adapter or weld on Receiver Backplate. a. Tromix Skeleton b. Tromix Skeleton with Limbsaver c. ACE 7.5" Skeleton d. ACE 8.5" Skeleton e. ACE 9.5" Skeleton f. M4 6-position collapsible stock available in Black and Green. In order to attach M4 stock, you must have i. AR15 Internal Stock Adapter or ii.AR15 stock adapter + (stock adapter or Receiver Backplate g. Magpul CTR Stock. In order to attach CTR Stock, you must have AR15 Internal Stock Adapter or AR15 stock adapter + (stock adapter or Receiver Backplate) 6. Trigger Holes When you remove the factory trigger, there will be holes in the receiver that need to be filled. You can fill the holes by welding them, screw build kit, or rivet kit to fill the holes. If you purchase the Saiga Internal Stock Adapter , the screw holes are filled using block mounting hardware.

FOG-12

FOG-12 "FIST OF GOD" Receiver Machined at proper degree of angle and back plate Professionally Tig welded, smoothed and blended, you will not be able to see where the receiver ends and the plate begins. TAC Modified G2 Machined, and custom fit and polished all contact surfaces for a crisp smooth pull trigger pull lightened and adjusted for over travel. Gallil pistol grip installed. Tromix skeleton stock with folding stock mech installed Function service, Gas block aligned as required gas ports enlarged. Holes TIG welded and blended. Install tri rail or Gallil Style Charging handle HK Front and rear sights Tig welded and blended. Tromix shark break or flash hider installed or Chaos Warthog Door Breacher Brake Sandblasted with aluminum oxide . Professionally Parkerized. Options Available Chaos HK friendly Quad rail $150 when avail Chaos forward pistol grip $50 when avail XS Sights - Tritium Front, Ghost Ring Rear $120 Tromix Limb Saver $65 Surfire 12 round $45

TAC-47 Saiga 223 Conversion

This Saiga .223 has been converted here at TAC-47 to completely revamp the entire weapon. The original furniture was replaced with an AR-15 6-position stock and a Galil style pistol grip. A Tapco trigger group and Northern Star 4 power scope mounted to a Beryl scope mount offer clean and accurate target hits. The front hand guard was replace with a UTG quad rail system with a vertical grip, and finished off with a US made muzzle break, and parkerized

DN 789

Don, thanks you here is your charge.

Universal Receiver Block with CAR Stock Adapter

If you already have an M4 or CAR stock use thes parts to attach to your AK. Includes all parts and hardware to mount it to your stamped AK. Includes: AKRBU Universal Receiver block (AKRBU-PN), Pig Nose (PN), lock ring, and 1 1/4" ambi sling mount.

Saiga Rifle and Shotgun Receiver Block, Grip and Sling Mount

US made. Includes all mounting hardware.

HK 91 Receiver Block

Daewoo DR200 & 300 Receiver Block

This is the new 2006 Daewoo Receiver lock. This grip uses the ACE US-Made Daewoo K2 style pistol grip (sold separately)

AR180 Receiver Block

Modification to receiver is necessary. The stock support must be cut down to approximately .450" then the AR180BB securely installs with one screw.

AR Compact Receiver Block

The ARRB-C is a compact receiver block designed to screw into any receiver or receiver block that has an AR15 type stock interface. Particularly receivers with a "threaded whole only", and not the full "tear-drop" type interface found on AR15 receivers; for example: SAGE M14 stocks, and many tactical shotgun adapters. The ARRB-C screws inside said receiver, then, by tightening two screws, the threads expand and lock the ARRB-C in place. It can be used with or with out a CAR plate. There is no lock nut necessary, enabling the folding mechanism to mount directly against the receiver, for a integrated look.

Ultra Light Modular Fixed Stock

Ulta Light Modular stock parts are precision machined in the U.S.A. from 6061-T6 aluminum. Then the parts are oxide blasted and hard anodized flat black. Ultra light Modular Stocks include these components: 1. Ultra Light Butt Stock. 1 1/2" machined in sling mount.(#AR-UL-butt) 2. Soft rubber, 1/2" thick recoil pad. Includes stainless steel mounting screws.(# RP.5) 3. Receiver Extension Tube full length (10.2") A1/A2. This RET can be cut to length to for a custom fit. Further, by removing the clamp-on Ultra Light Butt Stock, you can store batteries, small tools and cleaning kit inside of the extension tube once the back has been cut off.(#RET-A1/A2) 4. ACE's super comfortable soft-foam cheek rest; for a super comfortable cheek weld.(#ARFX-OT)

M4 SOCOM Modular Stock

The M4 SOCOM Modular stock can be mounted on any receiver adapter block ACE produces. Stock includes M4 SOCOM stock (M4S), CAR stock adapter (PN), and thin lock-ring (LR .16). Specify length (8.5" to 10.5" or 10" to 12") Maxium listed length includes 1/2" recoil pad.

M4 Six Position Collapsible Stock

The M4, Six Position, modular stock varies the length from 8.0" to 12.0" in six 3/4" increments. This feature makes this stock ideal for operators who train with or without armor, or for use when multiple operators with varying lengths of pull are using the same weapon.CAR stock adapter is also slotted and has 1/2" of vertical adjustment for correct eye/ sight alignment. Includes: ACE, U.S. made six position M4 stock and CAR stock adapter (P# PN), lock ring and Mil Spec. sling mount. For use with all ACE receiver blocks and folding mechanisms. ( Does not include buffer, spring, receiver block or recoil pad.) The M4M modular stock is not intended for use on an AR15. Please specify Black, Coyote Brown or OD Green.

AR15 UL-M Folding Stock Set

Includes: AR receiver block (P# ARRB), folding stock mechanism with 1 1/4" sling mount (P# FSM-SMG), ULM Modular with lock ring and CAR stock adapter (P# M4M), and all mounting screws. A CAR lock ring, spanner wrench is useful for installation, and is not included, see below to purchase. Must use alternate recoil system like ZM LR300 or .22 LR converstions. No modification to receiver is necessary.

AR15 M4S Folding Stock Set

Includes: AR receiver block (P# ARRB), folding stock mechanism with 1 1/4" sling mount (P# FSM-SMG), M4 SOCOM Modular with lock ring and CAR stock adapter (P# M4M), and all mounting screws. A CAR lock ring, spanner wrench is useful for installation, and is not included, see below to purchase. Must use alternate recoil system like ZM LR300 or .22 LR converstions. No modification to receiver is necessary.

AR15 M4M Folding Stock Set

Includes: AR receiver block (P# ARRB), folding stock mechanism with 1 1/4" sling mount (P# FSM-SMG), M4M Modular with lock ring and CAR stock adapter (P# M4M), and all mounting screws. A CAR lock ring, spanner wrench is useful for installation, and is not included, see below to purchase. Must use alternate recoil system like ZM LR300 or .22 LR converstions. No modification to receiver is necessary.

AR15 FX Folding Stock Set

AR side folding stock fits Shotgun reciver blocks and SIG556 and .22 LR conversions with ans AR15 type stock interface. Must use alternate recoil system like ZM LR300 or .22 LR converstions. No modification to receiver is necessary.

M4 SOCOM Modular Five Position Side Folding Stock

Adjusts from 11.2 to 13.2" in half inch increments.( Length of stock measured from the back edge of AK's receiver to the lowest point on the curve of the butt pad.) Includes all parts and hardware to mount this stock to your stamped AK. Includes: Universal Receiver Block (AKRBU), Folding Stock Mechanism (FSM), M4 SOCOM stock with sling mounts (M4S(M)), Pig Nose (PN), lock ring, and 1 1/4" ambi sling mount (SS-AR).

M4 SOCOM Modular Five Position Non-Side Folding Stock

Adjusts from 10.5 to 12.5" in half inch increments.( Length of stock measured from the back edge of AK's receiver to the lowest point on the curve of the butt pad.) Includes all parts and hardware to mount this stock to your stamped AK. Includes: Universal Receiver Block (AKRBU), Folding Stock Mechanism (FSM), M4 SOCOM stock with sling mounts (M4S(M)), Pig Nose (PN), lock ring, and 1 1/4" ambi sling mount (SS-AR).

M4 Six-Position Side Folding Stock

Includes all parts and hardware to mount it to your stamped AK. Includes: AKRBU Universal Receiver block (AKRBU), Folding Stock Mechanism (FSM), M4 six position stock with sling mounts (M4M), Pig Nose (PN), lock ring,and 1 1/4" ambi sling mount.

M4 Six-Position Non-Folding Stock

M4 six position (telescoping only) non-folding stock. Includes all parts and hardware to mount it to your stamped AK. Includes: AKRBU Universal Receiver block (AKRBU), Folding Stock Mechanism (FSM), M4 six position stock with sling mounts (M4M), Pig Nose (PN), lock ring,and 1 1/4" ambi sling mount.

H&K friendly QUAD RAIL Chaos

This is one of Tac 47 and Chaos collaboration, it is a Chaos quad rail for your Saiga 12 that works with welded on H&K sights. TAC 47 has exclusive rights to the Quad rail that is manufactured by Chaos. now if your Optics break, you have your sights as a back up.

Arsenal SGL21-61

Details Manufacturer: Russia Description: Beat the Heat with this HOT Summer Sale! Was: $995.00 Sale price: $549.00 (You Save Over $101 OFF) (Offer good til August 14, 2009 12noon PST) SGL21 (Saiga) - Black Stockset Russian made stamped receiver, 7.62x39 caliber, front sight block with bayonet lug and 24x1.5 right-hand threads, muzzle brake, standard mil-spec. handguards with stainless steel heat shield and Warsaw length buttstock, 1000 meter rear sight leaf, scope rail, accessory lug. Comes with 5rd. magazine! SPECIFICATIONS: Caliber: 7.62 x 39 mm Total Length: 861 mm (33 7/8 in.) Barrel Length: 415 mm (16.3 in.) Rifling: 4 grooves Twist Rate: 1 in 240 mm (9.44 in.) Weight without Magazine: 3.24 kg (7.15 lbs.) Muzzle Velocity: 710 m/s (2,329 fps) Effective Range: 500 m (550 yds) Maximum Range: 1,350 m (1,480 yds) Rear Sight Range: 1000 m (1,094 yds)

Arsenal AK 47 SGL21-66

Details Manufacturer: Russia Description: SGL21-66 Saiga rifle, US made black polymer furniture, Warsaw Pact length buttstock, compensator, 5-round magazine, 7.62x39 caliber, 16 barrel, front sight block with bayonet lug, accessory lug, 24x1.5mm right-hand threads, durable aluminum upper and lower handguards with Picatinny rails, US made double stage fire control group, 1000m rear sight, cleaning rod, scope rail. SPECIFICATIONS: Caliber: 7.62 x 39 mm Total Length: 861 mm (33 7/8 in.) Barrel Length: 415 mm (16.3 in.) Rifling: 4 grooves Twist Rate: 1 in 240 mm (9.44 in.) Weight without Magazine: 3.24 kg (7.15 lbs.) Muzzle Velocity: 710 m/s (2,329 fps) Effective Range: 500 m (550 yds) Maximum Range: 1,350 m (1,480 yds)

Tapco Original Style Grip

Designed after the original style pistol grip, the TAPCO version is an improvement from the original using military grade composite and featuring a textured grip. This item is marked as "TAPCO USA" and counts as 1 U.S. Sec 922R compliant part.

Erogonomic Pistol Grip for AK47 or Galil

Product Description: Ergonomically designed with finger swell & backstrap Surfacing enhances grip & minimizes slippage when wet Beavertail for better control, higher & firmer hold Made from reinforced plastic composite LIFETIME WARRANTY

Tromix Flash Hider

Tromix Flash Hider for Saiga 12 - Screws onto factory threads. Made in United States

TAC 12 T.G.R.S PLUG

Available now is the TAC 12 T.G.R.S which stands for Tactical Gas Regulating System. Its a hand adjusting Gas Regulator, it has easy to grip knurling and smooth edges to make adjusting with your hand possible, with no tools. This directs and maximizes the gas, optimizing cycling Tactical Gas Regulating System has many improvements over the factory plug. Installs in minutes. Simply unscrew the factory plug and screw this one in in only minutes. Available and shipping

Tac-47 Swart Mamba

S12 Slug Slinger

9mm Side Cocking Carbine Rifle and Scope Mount with 16" threaded barrel

9mm Side Cocking Carbine Rifle and Scope Mount with 16" threaded barrel Details MPA20SST-A one (1) threaded barrel Thread size 1/2 x 28

9mm Side Cocking Carbine Rifile with 16" threaded barrel

9mm Side Cocking Carbine Rifile with 16" threaded barrel Details MPA20ST-A one (1) 30 round mag Thread size 1/2 x 28

Spike's Tactical 37MM Rail Mount Launcher "Havoc"

The newest product from Spike's Tactical... the 37mm STZ-Havoc Flare Launcher. - CNC machined from solid billet 6061-T6 Aluminum and 1018cr Steel . - One piece Launcher Tube and Hand Grip design. - Cylindrical Push Button Breech Lock. - Extended Tube opening Supports 5 3/4" long cased USCG approved munitions. - Durable Matte Black Finish. -Mounts rock solid to Carbine length rail sytem or longer. The 37mm STZ-Havoc Flare Launcher features the latest in design and manufacturing technology. Parts are CAD designed and CNC machined from solid billet material rather than the typical stamped and welded construction of other launchers. The 6061 T-6 aircraft grade aluminum components are anodized in a non-glare matte black finishing for maximum durability and ease of maintenance. Additional components are built from 1018 cold rolled steel and plated with a mil-spec black oxide finish. The proprietary STZ push button cylindrical breech lock design is 3 times stronger than existing lever lock systems. The Havoc is designed to mount on any mil spec rail system. Installation simply requires sliding the launcher onto the bottom rail of the handguard and tightening two set screws which are included. Please state in the comments weather you would like the 9 or 12 inch launcher.

AK REAR SIGHT RECEIVER RAIL SYSTEM

This part is designed to attach to the rear sight support (in front), and the tang of the rifle (in back). It's made of 7075 aluminum, anodized black, and has provisions for both windage and elevation adjustment. It's also designed to accommodate regular disassembly of an AK rifle. It provides the user with a 1913 rail over the receiver cover on a standard-pattern AK, with AR sights at the back of the receiver (providing an approximately 60% greater sight radius). Not for Yugoslavian or milled receiver rifles.

Erogonomic Pistol Grip for AK47 or Galil

AK-47 Gas Tube with Vented cover

AK-47 Gas Tube with metal vented cover. These are brand new gas tubes that may require some slight fitting so that the locking cam will hold the gas tube in place properly.

Tromix Flash Hider

Tromix Flash Hider for Saiga 12 - Screws onto factory threads. Made in United States

XS Sights - Tritium Front, Ghost Ring Rear

XS Sights - Tritium Front, Ghost Ring Rear (must have HK type sights installed)

ACE Original Skeleton Stock

ACE Original Skeleton Stock. End cap and butt are machined from solid aluminum billet, oxide blasted and hard anodized. Top bar and center brace are turned from the super strong engineered polymer Delrin. This stock is the strongest and highest quality skeleton stock available. Includes choice of .5" or 1.0" curved, rubber recoil pad. This ACE exclusive is available in three lengths. Includes 1/2" recoil pad. Please Specify 7.5", 8.5" or 9.5"

6 Position CBS Stock with Aluminum Tube for AK47 Stamped Receiver

Side snap-tight latch compartment provides storage for 4 CR123 batteries Side Picatinny rail allows addition of Adjustable Cheek Piece (ACP) Rubber non-slip buttpad with tapered angle, allows faster shouldering and increased comfort with body armor 2 ultrasonically welded metal quick release sling mount points Available for milled, stamped and underfolding receivers Buffer tubes provide sealed storage area for a cleaning kit or small items Higher cheekweld & longer stock length

Tapco Original Style Grip

Gallil style Handguard

in order to install on your Saiga 12 minor filing and a Tromix hand guard retainer will be required. Reduces heat and improves ventilation by providing a greater cooling area around the barrel Modeled after the original Galil pattern Constructed from military grade composite Removable top cover for full Galil type ventilation U.S. Sec. 922r compliant part Made in the U.S.A. Please specify black, OD green or tan.

Galil Handguard Bracket for Saiga 12

DPH SKELETON 8.5" SOLID BILLET

TAC 47 DIY trigger guard saiga

TAC 47 Industries Do-It-Yourself, bolt on Saiga trigger guard, grip nut, and safety stop all in one unit. To install, just tear off the OEM trigger plate, Tap out rivets and and screw this in place. You can have your pistol grip conversion done in about 15 minutes with this part.

Arsenal Model: SLR-106FR

Details Manufacturer: Bulgaria, Arsenal Model: SLR-106FR Caliber: 5.56x45 Action: Semi-Auto Type: Rifle Description: SLR-106FR - Import, 5.56 NATO caliber, stamped receiver, bayonet lug, 24mm muzzle brake, cleaning rod, accessory lug, black polymer furniture, side folding polymer stock, stainless steel heat shield, scope rail. Comes with one 5-round magazine, sling, oil bottle, and cleaning kit. SPECIFICATIONS Caliber: 5.56 x 45 mm (.223) Total Length (with Compensator): 937 mm (36 7/8 in.) Folded Length (with Compensator): 695 mm (27 3/8 in.) Barrel Length: 415 mm (16 1/4 in.) Rifling: 6 grooves Twist Rate: 1 in 178 mm (7 in.) Weight without Magazine: 3.31 kg (7.3 lbs.) Muzzle Velocity: 910 m/s (2,985 fps) Effective Range: 500 m (550 yds) Maximum Range: 1,350 m (1,480 yds) Rear Sight Range: 800 m (875 yds)

Folding Stock Mechanism

Fits between the front of fixed stock and the receiver block .By inverting the FSM the stock can be made to fold left or right. Adjustable for comb height .500" ( vertical adjustment ). Precision machined from 7075T6 Billet. Heat treated and hard anodized for maximum wear resistance and strength. Locks tight. Can be "pulled open" for rapid deployment of stock. Length .700 . Weight 74g ( 2.7 oz. ). Check Local, State & Federal Laws before installing a folding stock on you weapon.

AK-47 US Made (KVAR) Polymer Pistol Grips

AK-47 US Made Polymer Pistol Grips. Please specify black, OD green or tan.

big daddys gun

I picked up my S12 today and I am really happy with it. The work was done by Tac47 Industries and took about 3 weeks. Keith did a very nice, clean job. I especially like the triggerguard they used, it looks factory. Sorry about the grainy photo, I only had my iphone to take the pic. I will be taking it shooting tomorrow to test it out. I highly recommend Tac47 Industries for a very professional conversion job without a long turnaround. For those like me without the time to do it myself its a great option. It didn't cost me an arm and a leg either. take care, y'all, --Dave

Doug B.

I finally got to shoot the twins!!! We shot about 150 rounds a piece through them and they worked great! I have some videos of some of the shooting, just insane!! Doug

David Owens

My Saiga 12 with the Tromix forend I bought from you. For what its worth I found Tac47 very pleasant and easy to deal with! Regards David Owen

Spike's Tactical 37MM Rail Mount Launcher "Havoc"

USA Marked, Krinkov Flash hider

New USA Made, USA Marked, Krinkov Flashider, 14x1 Left Hand Thread, Brand New, Fits all 7.62x39 AK's with Threaded Barrel..

9mm Safety Extension

9mm Safety Extension MPA930T-73 Length: 5" Thread size*: 1/2 x 28

45 Caliber Safety Extension

45 Caliber Safety Extension Details MPA1T-73 Length: 4" Thread size*: 11/16 x 16

45 Caliber Muzzle Brake Details

45 Caliber Muzzle Brake Details MPA9096 Length: 3" Thread size: 7/8 x 9

AK-74 US made Gas Piston

These are CNC machined out of stainless then heat treated unlike the others being sold that are just machined then boxed up to ship. Each piston is laser engraved with USA.

UTG AK-47 Quad Rail Systems Mount

Precision machined with maximum strength. Four mil-spec Picatinny rails for versatile accessory applications. Clever rail system locking design includes lower connecting walls mating with upper channels to achieve the most solid and secure fit- Lower quad-rail system to secure barrel Upper quad-rail system to secure gas tube Simple and friendly installation, no gunsmith or tool required. Great zero-retention capability for all accessories installed on the rails. Intensively tested by field experts under extreme heat and sub-zero temperature and demonstrates most satisfactory performance. Ultimate tactical solution to enhance accuracy under toughest environments. Fits model 47 and variants. Hard anodized finish for wear resistance. Great quality UTG rubber rail guards included for comfort and protection

Saiga 308 Conversion Folding Stock

Saiga .308 with a ACE 9.5 skeleton side-folding with folding mechanism and modified receiver block. The internals are a Tapco G2, non-slap trigger group and new USA manufactured springs all around. A Galil ergonomic pistol grip makes for solid control. The sighting is handled by custom H&K G3 front and rear sights. The custom contoured barrel is threaded for AK-style (14mm left handed) muzzle break, and includes an US made muzzle break. The entire rifle is fully parkerized to insure a durable long-lasting finish with minimal maintenance.

Saiga .308 Conversion, Fixed Stock, Sight Rail

Saiga .308 with a Command Arms, six position aluminum tube stock. The internals are a Tapco G2, non-slap trigger group and new USA manufactured springs all around. A Galil ergonomic pistol grip makes for solid control. A high-end Krebs Scope rail, with a rear peep sight integrated and a custom H&K front sight makes for an accurate hit every time. Included is a 3-12x50 illuminated reticle scope to reach out further, if need be. The custom contoured barrel is threaded for AK-style muzzle break, and includes an AR-15 style birdcage break. The entire rifle is fully parkerized to insure a durable long-lasting finish with minimal maintenance.

M11/9 Receiver Block

This receiver block allows for the use of any ACE stock on a MAC 9/11 or variant, Including a MPA.

Improved AR Pistol Kit

Includes gusset (with new better clamp), receiver extension tube, hardware and 1/4" sling mount (shown middle), foam over-tube (you cut to length). Extends 7" from the back edge of the receiver.

AK-47 Birdcage Flashider

14x1 Left Hand Thread, Made In USA.

AK-47 Made In USA Flash/Muzzle Brake

AK-74 Type Made for the AK-47 7.62x39. 14x1 Left Hand Thread. Made In U.S.A Marked Made In U.S.A..

AK-47 Polish Bayonet

AK47 Polish Bayonets, Excellent Condition, These are the Best Looking Bayonets we have seen.

Saiga IZ-132 7.62x39 Rifle

Russian mfg. 16 chrome-lined barrel Semi-auto 7.62x39 caliber 3-scale sight leaf sights Black synthetic stock Includes Sling Studs, Cleaning Tools, Oil Bottle, Manual, and (1) 10d Mag CANNOT BE SOLD TO CALIFORNIA RESIDENTS. FFL REQUIRED. Note: Price available on request, pending availability.

Saiga 7.62x39with Pistol Grip

Saiga 7.62x39 rifle with pistol grip US-made conventional black polymer buttstock & black polymer pistol grip Uses standard AK-type mags Includes (1) 30rd mag Note: Price available on request, pending availability.

Saiga IZ-137.308 Rifle

Russian mfg. 16 chrome-lined barrel Semi-auto 3-scale sight leaf sights Black synthetic stock Includes Sling Studs, Cleaning Tools, Oil Bottle, Manual, and (1) 8rd Mag CANNOT BE SOLD TO CALIFORNIA RESIDENTS. FFL REQUIRED. Note: Price available on request, pending availability.

Saiga IZ-114 .223 Rifle

Russian mfg. 16 chrome-lined barrel Semi-auto .223 caliber 3-scale sight leaf sights Black synthetic stock Includes Sling Studs, Cleaning Tools, Oil Bottle, Manual, and (1) 10d Mag CANNOT BE SOLD TO CALIFORNIA RESIDENTS. FFL REQUIRED. Note: Price available on request, pending availability.

9mm Top cocker Threaded Rifle Conversion Kit

9mm Top cocker Threaded Rifle Conversion Kit Details MPA9050RC

9mm SC Threaded Rifle Conversion Kit

9mm SC Threaded Rifle Conversion Kit MPA9051RC

9mm SC SM Threaded Rifle Conversion Kit

9mm SC SM Threaded Rifle Conversion Kit MPA9043RC

9mm Magazine Loader

9mm Magazine Loader Details MPA20-69

9mm 30 Round 'Sten' Magazine

9mm 30 Round 'Sten' Magazine Details MPA20-70

45 SC Low SM Threaded Rifle Conversion Kit

45 SC Low SM Threaded Rifle Conversion Kit MPA9071LRC

9mm Top Cocking pistol with 6" threaded barrel

one (1) 30 round mag Thread size 3/4 x 10

9mm Top Cocking pistol with 10" threaded barrel and AR-15 hand guard

one (1) 30 round mag Thread size 1/2 x 28

9mm Sports Rifle, Side Cocker and Scope Mount with 16" threaded barrel

9mm Sports Rifle, Side Cocker and Scope Mount with 16" threaded barrel Details MPA971X2A one (1) 70 round drum Thread size 1/2 x 28

9mm Side Cocking pistol with 6" threaded barrel and Scope Mount

one (1) 30 round mag Thread size 3/4 x 10

9mm Side Cocking pistol with 6" threaded barrel

one (1) 30 round mag Thread size 3/4 x 10

9mm Side Cocking pistol with 10" threaded barrel and Scope Mount with AR-15 hand guard

9mm Side Cocking pistol with 10" threaded barrel and Scope Mount with AR-15 hand guard Details MPA35SST-A one (1) 30 round mag Thread size 1/2 x 28

9mm Side Cocking pistol with 10" threaded barrel and AR-15 hand guard

9mm Side Cocking pistol with 10" threaded barrel and AR-15 hand guard Details MPA35ST-A one (1) 30 round mag Thread size 1/2 x 28

9mm Mini Side Cocking pistol witih 3 1/4" barrel and Scope Mount

9mm Mini Side Cocking pistol witih 3 1/4" barrel and Scope Mount Details MPA930SST-A one (1) 30 round mag Thread size 1/2 x 28

9mm Mini Side Cocking pistol with 3 1/4" barrel

9mm Mini Side Cocking pistol with 3 1/4" barrel Details MPA930ST-A one (1) 30 round mag Thread size 1/2 x 28

9mm Mini pistol with 3 1/4" barrel

9mm Mini pistol with 3 1/4" barrel Details MPA930T-A one (1) 30 round mag Thread size 1/2 x 28

45 Caliber Top Cocking pistol with a 6" threaded barrel

one (1) 30 round mag Thread size 7/8 x 9

45 Caliber Top Cocking pistol with 10" threaded barrel and AR-15 hand guard

one (1) 30 round mag Thread size 11/16 x 16

45 Caliber Top Cocking Carbine Rifle with 16" threaded barrel

45 Caliber Top Cocking Carbine Rifle with 16" threaded barrel Details MPA1T-A one (1) 30 round mag Thread size 11/16 x 16

45 Caliber Side Cocking pistol with 6" threaded barrel

one (1) 30 round mag Thread size 7/8 x 9

45 Caliber Side Cocking pistol with 10" threaded barrel and Scope Mount with AR-15 hand guard

one (1) 30 round mag Thread size 11/16 x 16

45 Caliber Side Cocking pistol with 10" threaded barrel and AR-15 hand guard

one (1) 30 round mag Thread size 11/16 x 16

45 Caliber Side Cocking Carbine Rifle with 16" threaded barrel

45 Caliber Side Cocking Carbine Rifle with 16" threaded barrel Details MPA1ST-A one (1) 30 round mag Thread size 11/16 x 16

TAPCO AK AMD-65 Piston, U.S. Made

Made in the U.S.A. Fabricated to exact tolerances for optimal performance 5.125" length Constructed from stainless steel U.S. Sec 922r compliant part Marked TAPCO U.S.A. Lifetime warranty

Century International Arms Compliance Kit

CIA compliance parts package. Included is a US made fcg (hammer, disconnector, and trigger), US made black pistol grip, and a US made gas piston.

AK-47 Red Chinese Bayonet

AK47 Chinese Bayonet, Excellent Condition, Red Handle and Sheath, Limited Qty......

AK-47 Black Chinese Bayonet

AK47 Chinese Bayonet, Black Handle and Sheath, Excellent Condition... Limited Qty.....

Tapco Fusion Handguard

Designed with direct input from our military clientele, our AK FUSION handguard set enhances the look and function of your AK47. The lower handguard houses a concealed Picatinny rail for mounting lights, lasers, or vertical grips. The matched upper handguard offers increased dissipation and improved styling. This item counts as 1 U.S. Sec 922R compliant part.

TAPCO AK Original Style Polymer Buttstock

Patterned after the original Bulgarian fixed stock for the AK, this stock allows you to retain the original look of your AK while adding a compliance part. The stock comes complete with a metal buttplate and a sling swivel on the side. Fits only stamped recievers. Manufactured by TAPCO in the U.S. and constructed of military grade composite. This item is marked as "TAPCO USA" and counts as 1 U.S. Sec 922R compliant part. Please specify black, OD green or tan.

AK US Made (KVAR) Tan Stock Set

Introducing new four-piece US made stock set in the new Desert Sand color. K-Var's popular 1.25'' extended NATO length stock set for stamped receivers is now available in Desert Sand color. The lower handguard features stainless steel heat shield. The buttstock is assembled with US made bind free sling swivel and features trap door and compartment for the cleaning kit.

TAPCO AK-47 Double Hook G2 Trigger

This group has been modified for assembly outside of the gun to make it easy to drop into place in the rifle. It is US made and it contains the hammer, a double hook trigger, Disconnector, and bushing. This trigger group has a 3.5-4 pound trigger pull, an advanced design and a lifetime warranty By Tapco USA It is a sure-fire product. Whether you are replacing your trigger group to give the right number of American pieces for a pistol grip stock or just looking for the best trigger pull, this fire control group is the choice for you. It is guaranteed to drop in with a great fit and function on your rifle. Counts As 3 Compliance Parts

Arsenal Inc US Made 3pc Fire Control Group

US MADE FCG ~3pc. Hammer, Single Catch Trigger and Disconnector for Stamped receiver. - Metal Injection Molded - Black Oxide Finish - Designed from the original AKM By Arsenal Inc. Las Vegas, NV

U.S. Made, U.S. Marked, AK-47 Slant Flash Hiders

AK-47 Recoil Buffer 3 Pack

AK-47 Recoil Buffer 3 Pack(Black)

AK-47 Recoil Buffer (Black in color)

AK-47 Rear Sight Block with Rear Sight

Used Good Condition

AK-47 Grip Screw and base for the pistol grips

AK-47 Grip Screw and base for the pistol grips Fits All AK-47 varriants

AK to AR stock converter

Convert your Stamped receiver AK type Rifle to accept AR-15 style Stocks! This High quality piece will allow you to use any standard AR-15 type Butt Stock in your Stamped Receiver AK type rifle.

AK Retaining Plate

AK Retaining Plate This plate replaces any style retaining wire to keep your rifle working properly. Designed for easy hassle-free assembly

AK-47 Sight Tools

UltiMAK Multi Rail Forend System Model ACR2-SS Standard Length

Innovative design and precision manufacturing provide a very secure and rugged foundation for your premium accessories. Made of high strength, MIL STD hard anodized aluminum with 4140 steel attach points. Comes with all hardware and instructions. The generous length MIL STD 1913 Picatinny rails give plenty of room for your hand, plus any combination of rail mount lights, lasers, grips, sling mounts, and bipod mounts. Proprietary expanding rear tenon system squares and centers itself inside the receiver with extreme tenacity, while the dual, floating clamp system in front locks the unit to the barrel without applying off-axis forces to the barrel. You can mount a quality laser sight module with full confidence in maintaining your zero under harsh field conditions. A result of the thoughtful engineering you've come to expect from UltiMAK, it increases the cooling efficiency of the rifle, and is surprisingly lightweight, strong, comfortable, stable and versatile. The ACR2 body fits over the outside of the original forend cap (covering the original sling loop) and has enough width that your rail mounted items will be far less likely to interfere with one another.

Front Arm Short Vertical Grip

9mm 71 Round Drum Details

9mm 71 Round Drum Details MPA971-70 Only fits the MPA971X2A

TAPCO AK Mag Stacker (US Follower)

Perfect for adding a compliant part to your old surplus magazines or to revive an old magazine. This high capacity follower for the AK is constructed of the highest quality composite to ensure optimum performance. This item is marked as TAPCO USA and counts as 1 U.S. Sec 922R compliant part.

Arsenal Mag Follower

Made by Arsenal Inc in the United States, the Arsenal follower is an additional US made part for your 922r compliance. Made to the original design, with no reverse engineering, it provides flawless functionality and works with all 7.62x39 caliber mil. spec. magazines with 5, 20, 30, or 40 round capacity. Will also work on Saiga Magazines

AK-47 U.S. Made Magazine Floor Plates

U.S. made Arsenal Inc. Floor Plate. The MA7-004U is produced using a high tech progressive dye. With the saying, "We don't cut corners! This was made using 100% of the original technology. It is heat treated and blue finished and best of all, it bears the Arsenal Logo, the trademark for perfection and high quality products.

5 Piece US Compliance Package (SAW Grip)

Combo includes 5 U.S. Sec. 922r compliant parts: US s/h G2 - Hammer - Trigger - Disconnector - AK/MAK full length gas piston - AK/MAK SAW pistol grip Each part is Made in the U.S.A. Each part is marked U.S.A. Each part comes with a lifetime warranty

6 Piece US Compliance Package

6 piece US compliance package G2 s/h trigger group US made gas piston US made black pistol grip US made slant muzzle break

Detent Pin and Spring

Detent pin and spring to retain threaded muzzle attachment AK-47 front sight. This part is retained by the front cross pin on the front sight support Romanian

Axis or Pin for trigger, hammer, or auto sear

Axis or Pin for trigger, hammer, or Auto Sear Fits all AK-47, MAK90, or AK-74.

AK-47 Hammer Spring, Double Wound - for all models

AK Recoil Assembly Used Good Condition

AK Disconnector Spring

3mm Gas Piston Rivets

3mm Gas Piston Rivets These are for installing the new gas pistons

Ak-47 Pistol Trunion (1.25)

Has Sling Swivel Hole, Sling Swivel Not Included US Made

Ak-47 Pistol Trunion (1.20)

Has Sling Swivel Hole, Sling Swivel Not Included US Made

AK Builder Rivet Set

A- Long Swell Neck For Rear Trunnion or Yugo/RPK Front Trunnion B- Upper Front Trunnion or Pistol Grip Mount Rivet for Yugo M70 Fixed Stock (M70 Underfolders use standard length rivets on all three pistol grip mount holes) C- Short Swell Neck for Front Trunnion or Rear Trunnion (countersunk holes use swell neck rivets) D- Short Non-Swell Rivet for Flat Front Trunnion Holes, Front Four Rivets on Trigger Guard, Rear Rivet on Trigger Guard if using reinforcement plate and pistol grip mounts on Yugo's. E- Shortest Rivet for Rear of Trigger Guard on Non-Yugo's or when not using a reinforcement plate

YUGO M92 AK-47 (7.62x39) Receiver Flat

Now available for ordering are the new M92 flats that will have all of the holes in the correct placement for the trigger guard. The front trunnion holes will not be stamped, but the rear ones will be. The flats will have all of the standard dimples and the magwell will be the same width from front to back so they can be cut out for any caliber. To finish these flats you will need to buy a 5mm and 7mm reamer. Or at least get drill bits of that size to open up the holes in the flats once they are bent. At the same time you order the reamers buy 4mm (or 5/32) screw machine drill bits for drilling the trunnion holes. The rear trunnion holes are 4.5mm. Try not to buy the cheap import drill bits for drilling the trunnion holes.

YUGO AK Underfolder Receiver Flat

Made in the U.S.A. **Now BATF Approved Accepts single or double hook triggers Constructed from 4130 carbon steel 1.50mm thick Comes in a softened state...once formed it must be heat treated and hardened All holes are pre-drilled to the correct sizes Magazine opening may require fitting

TAPCO Improved AK Receiver Flat and Rails

AK Receiver Flat and Rails New improved hole locations designed to original production specifications. This new design features precut notches to accommodate the bolt carrier. Now has precut notches to accept the bolt carrier. This flat will have the trunnion holes drilled. This flat is a great start to any AK rifle build. It is constructed from high strength 4130 carbon steel to an exact 1.05mm thickness. Flats accept single and double hook triggers. . All are pre-drilled to the correct sizes to ensure a precise build. The flat arrives from the factory in a softened state and once formed it must be heat treated and hardened. Our flats are compatible with both the AK47 and AK74. NOTE: Receiver flats that have been bent in any way could constitute as a firearm and are non-returnable. Please verify your local and state laws before making the bends

TAPCO AK Cross Member Bushing & Rivet Combo

Complete Standard Stock Rivet Set With Center Support Bushing Made By Tapco

AK-47 Polish Underfolding Receiver Flat

This is an image of the new Polish Under folder flat, made by AK-Builder. Each flat will come with a set of rails with mag stabilizers on each side. These are stamped from raw materials and are NOT modified flats from any other manufacturer. This flat will not work with the Yugo M70, Yugo M92 or Romanian under folder rear trunnion

U.S. made solid polymer Left Hand folding Stock Set

U.S. made solid polymer folder including trunnion and hinge mechanism hardware U.S. made black upper and lower hand guards for stamped receivers, new design U.S. made matte black pistol grip, and stainless steel heat shield. The whole set counts as 3 U.S. made parts for sec. 922r

TAPCO AK-47 T6 Stock

AR-15 type collapsible stock for the AK Manufactured out of military grade composite to ensure high quality and strength Perfect for military and police applications...adjusts to body armor with six (6) positions Ergonomically designed for better comfort Textured butt stock to prevent slips Lifetime warranty Made in the U.S.A Counts as a compliance part. Please specify black, OD green or tan.

TAPCO AK-47 Side Folding Stock

Designed after the original Galil pattern. Manufactured for 1.05mm stamped receivers and can easily be trimmed for thicker receivers. Constructed from military grade composite. U.S. Sec. 922r compliant part Made in the U.S.A. Marked TAPCO U.S.A. Lifetime warranty. Please specify black, OD green or tan.

TAPCO AK-47 Handguard

Reduces heat and improves ventilation by providing a greater cooling area around the barrel Modeled after the original Galil pattern Constructed from military grade composite Removable top cover for full Galil type ventilation U.S. Sec. 922r compliant part Made in the U.S.A. Marked TAPCO U.S.A. Lifetime warranty. Please specify black, OD green or tan.

TAPCO AK Galil Style Handguard with Tactical Rails

AK Galil Style Handguard Influenced by the rugged Israeli rifle, this handguard improves your AK with added ventilation for reduced barrel heat. Having a wider grip area offers the shooter increased control for consistent shot placement. There is no need to replace or modify any parts on your rifle as this item simply replaces the original handguard. Installs easily and comes complete with removable top ventilation cover. This item is marked as TAPCO USA and counts as 1 U.S. Sec 922R compliant part. AK Galil Style Handguard Rail Set Designed to fit the TAPCO AK Galil Handguard, this 3-piece rail set includes all the hardware necessary for installation. Allows for the mounting of lights, lasers, and vertical foregrips.

Metal Triangular Folding Stock For Stamped Receiver Rifles

Folding Stock For Stamped Receiver Rifles. Complete side folding stock assembly. Folds to Left Side and includes all hardware to lock the stock into the folded position, rear trunion block also included.

AK-47 US Made (K-VAR) Black Stock Set

Introducing new four-piece US made stock set in the Black . K-Var's popular 1.25'' extended NATO length stock set for stamped receivers is now available in Black. The lower handguard features stainless steel heat shield. The buttstock is assembled with US made bind free sling swivel and features trap door and compartment for the cleaning kit.

AK US Made (KVAR) Plum Stock Set

Introducing new four-piece US made stock set in Plum. K-Var's popular 1.25'' extended NATO length stock set for stamped receivers is now available in Plum. The lower handguard features stainless steel heat shield. The buttstock is assembled with US made bind free sling swivel and features trap door and compartment for the cleaning kit.

AK US Made (KVAR) OD Green Stock Set

Introducing new four-piece US made stock set in the OD Green . K-Var's popular 1.25'' extended NATO length stock set for stamped receivers is now available in . The lower handguard features stainless steel heat shield. The buttstock is assembled with US made bind free sling swivel and features trap door and compartment for the cleaning kit.

AK US Made (Global Trades) Stock Set

Global Trades AK-47 Stock Set, Includes Black stock, pistol grip and hand guard set for stamped receivers. This set counts as three parts towards your 922r compliance. These come in black only and the stock is the standard short length like the original wood stocks.

Advanced Technology AK Strikeforce Stock Set

Six-Position Collapsible/Side Folding Folds to the Left Side of the Receiver (One Second Open/Close) Removable/Adjustable (3/8) Cheekrest Removable Buttpad Store Extra Light/Laser/Batteries Inside Stock Tube May be fired from folded position Sling Swivel Stud Improved Ventilation Use Original Mounting Hardware for Installation Assembled in Fixed Position Ergonomic and Textured Upper and Lower Handguards One 4 and Three 2 Picatinny Rails Molded Inserts for When Rails are Not Used Rails are Removable and Interchangeable Handguards are Ventilated Sling Swivel Stud Count Towards US Compliance Parts Ergonomic, Textured Pistol Grip Installs with Original Mounting Hardware (Screw & Nut) Matches Advanced Technology, Inc Handguards Counts Toward US Compliance Parts Virtually Indestructible Matte Black Glass-Filled Nylon Made in USA Lifetime Warranty No Gunsmithing FITS: All AK Variants (Stamped Receivers)

US Made Phantom Flash Hider AK47

The popular phantom flash suppressor has been redesigned to work as a muzzle compensator while maintaining the flash hiding capabilities. This 4 port design eliminates dust problems when shooting prone. Threaded 14x1 Left Hand Thread

US Made AK-47 Barrel Nut

US made barrel nut which may or may not be considered a 922r part, but in case it is ever questioned then you are covered. The size of this part was taken from a Romanian underfolder parts kit and looks very close to a Russian nut off of a milled front end. Threads are 14-1 left hand.

AK 47 Disassembly and Reassembly Guide

Disassembly and reassembly for all models Easy to use -- Comb binding lies open and flat on your work surface The only current printed manual that includes information on ALL models from the listed dates

XS SIGHT SYSTEMS WHITE STRIPE FRONT POST

White Stripe Front Post (with tritium insert)

XS SIGHT SYSTEMS WHITE STRIPE FRONT POST

Big Dot Front Post (with tritium insert)

XS SIGHT SYSTEMS AKM EXPRESS SET

White Stripe Rear & Big Dot Tritium Front sight combo

VLTOR AR STYLE COLLAPSIBLE BUTTSTOCK

AR style collapsible buttstock for AK rifles, standard model, version 2. Allows the AK owner to put an M4 style buttstock on his AK! "Complete Kit As Shown" includes, in addition to the basic modstock and adapter, includes sling swivel and cheek piece storage units. $208.50 - COMPLETE KIT AS SHOWN $95.00 - MODSTOCK (ADAPTER NOT INCLUDED) $85.50 - ADAPTER

KREBS CUSTOM SAIGA-12 COMBAT SHOTGUN SIGHTS

Front sight is made from 1018 case hardened steel, clamps on barrel and features an AR-15 front post and detent. Rear sight is of "ghost ring" type which can accept a replaceable aperture (aperture shown for illustration only). Made from pre-hardened 4130 chrome-moly steel.

ENHANCED AK SELECTOR LEVERS

MK IV: While the standard AK selector lever is well designed for the function it performs, it 's operation does require the shooter to remove the firing hand from the pistol grip. The Krebs Custom AK selector lever allows for manipulation of the selector while maintaining the shooting hand in firing position, as well as provides a notch for locking back the bolt for inspection. A one for one replacement of the OEM part.

KCI QUAD PICATINNY RAIL FORE-END FOR STANDARD AK RIFLES

T6-6061 aluminum, black hard coat anodized. Designed for use with all configuraiton AK rifles. Solid, won't shift. The right mount at the right price.

Ambidextrous Foldable Foregrip

Foldable Tactical Foregrip with 5 Adjustable Positions to Allow for Versatile Shooting Positions and Enhance Target Lock Performance Under Toughest Environments Press the Position Button to Fold Forward/Backward and Release the Button to Lock in Desired Position Designed to Mount on Any Picatinny/Weaver Rail with Ergonomic and Non-slip Features for Superior Control of Weapon Ambidextrous Design, Complete with Battery/Tool Compartment and Pressure Switch Housing

AK-47 Quad Rail System

AK PEEP SIGHT

The new KCI AK peep sight in fixed windage only. The sights are made from 4130 steel, heat treated to a hardness of 45 Rockwell. They have a black oxide finish. They are graduated to either 800 or 1000 meters, use the original elevation slide and are a direct replacement for the original AK rear sight. Please specify whether your rifle uses an 800 or 1000 meter sight when ordering.

Ak Quad Rail System for Large Barrel

This is an excellent quality 2-piece aircraft aluminum picatinny rail system for AKs. The 479 version is for Standard/Oversized Barrel and Rear Sight Block . For Romanian AKs, use the 478 version. Precision machined with maximum strength Four 6 long mil-spec Picatinny rails with 14 slots each for versatile accessory applications Clever rail system locking design includes lower connecting walls mating with upper channels to achieve the most solid and secure fit- Lower quad-rail system to secure barrel Upper quad-rail system to secure gas tube Simple and friendly installation, no gunsmith required Great zero-retention capability for all accessories installed on the rails Intensively tested by field experts under extreme heat and sub-zero temperature and demonstrates most satisfactory performance Specially designed groove rail top for optimal viewing through front sight Fits Model 47 and variants with oversized barrel and rear sight block Hard anodized finish for wear resistance UTG rubber rail guards included for great comfort and protection

SIGNATURE PLATINUM

SIGNATURE PLATINUM MEMBERSHIP BENEFITS $7,200 Initial Registration Fee** $195 per month* Full Use of 35 Indoor priemium ranges as well as 8 private Platinum Signature Ranges Private Lounge with attendant Locker rooms & shower use Free firearms storage (up to 4 long guns and 4 handguns at one time) Reduced rates for additional firearm storage. 6 hours of private lessons a year (private lesson fee is normally $165/hour) No firearm rental fees (does not apply to NFA firearms) Complimentary basic cleaning after range use. No FFL transfer fees (normally $25) [does not apply to NFA transfers] FREE Machine Gun rental on your Birthday (Mini Uzi, Uzi, MP5, MP5K, or UMP9 with 2 magazines and a target) 12 Guest passes a year entitling Guests to full day use of the private range and Platinum private lounge. FREE use of Eye and Ear protection 1 FREE Members Polo Shirt Titanium Lane reservation (maximum 48 hours advance notice; subject to availability) FREE use of conference room (subject to availability, reservations required) Reduced rates on training courses Reduced firearms rental fees Reduced rates for firearms storage Range ammo always discounted for Members Price matching on firearms in stock in Metro-Phoenix stores (does not pertain to internet sales or mail order) No charge for special orders Holster and Rifle (Tactical) qualifications Specials on selected products Transferable membership (all transfers are subject to SGC approval and a $250 administrative fee. If the member requests, SGC will assist the member in locating a buyer. There will be an additional $250 fee if SGC is successful in obtaining a buyer for the Titanium Membership.) *One year membership commitment required

BUILD YOUR OWN CONVERSION

Conversion Kit MAG 10 "Magpul"

Two weeks out on the mag well. Kit includes-G2 Modified by Tac 47 "Fire Control Group", Tac 47s MAGWELL TRIGGER GUARD COMBO , Nylon Hole Plugs, Magpul MOE, CAA poly tube, Tapco SAW Grip in your choice of color.

Tac 47 M.A.G. 12

This is a one of a kind Magwell for the Saiga 12 platform. Easy install. 100% feeding reliability. Easy in stall of magazine with AR style insert. Push Button release. AK Style. Integrated trigger guard. This is the newest innovation to the Saiga Platform of Magwells. Preorder is 3 weeks out. First 20 Preorders Receive a free Autoplug.

Tapco Fix Stock Black

Occasionally, nothing beats the original. We've modeled the AK Fixed Stock after the original Bulgarian design so you can keep the look you've come to love but with some added features. The stock is maked as "TAPCO USA" so it will count towards your compliance parts and it also comes outfitted with a metal buttplate and a sling swivel on the side.

Magpul AFG 2

Low-profile forward grip/hand stop takes advantage of natural body mechanics to give the shooter more precise control, faster pointing, and less operator fatigue. The Magpul AFG (Angled Fore-Grip) positions the support hand close to the centerline of the bore for maximum recoil control to aid in fast, accurate follow-up shots. Provides a consistent reference point for finding the correct hand position quickly when mounting the weapon under stress. The natural, ergonomic hand position with the palm facing up results in better blood flow than the clenched fist stance often used with vertical grips that leads to fatigue and loss of sensation during long periods in the ready position. Improves on the thumb break hold often used with standard vertical grips by allowing the thumb to rest comfortably alongside the top rail, pointing forward, with the rest of the hand in full contact with the forend. Heavy-duty reinforced molded polymer construction stands up to the hard knocks of tactical operations, and deep, molded-in grooves help you maintain a firm grip even with wet hands. Interchangeable inserts give the choice of a straight, uninterrupted gripping surface or one with a convenient ledge to support the index finger. Slides over any Picatinny-style rail and locks securely in place with a hardened steel crossbolt. The AFG may be installed on tactical shotguns and other rifles with railed forends; wont interfere with insertion and removal of magazines on AK-47s MAGPUL

Commercial Buffer tube

This is a Six position buffer tube perfect for your conversion. Add a Ace AR folding interface and make your Saiga 12 a collapsible and folding stock

TAC 556 AR-15

Chambered in 556 the TAC 556 is the newest member of our AR line. It is a M4 Style AR-15 with the Flat top, Chrome lined Barrel, 1:9 Twist, Six Position Collapsible Magpul Stock. Fit Finish and Function of this AR-15 is not Challenged by any other model in its class. "its one beautiful, reliable and affordable Rifle"

Glock 23 Compact Gen 3

Compact dimensions for open and concealed carry, minimum weight despite large magazine capacity in .40 caliber. This and the reliability of the GLOCK pistol known throughout the world, which was demonstrated through tests and widespread use by US law enforcement agencies, were decisive arguments for the F.B.I. and countless police authorities for introducing the GLOCK 23 as their official service pistol. Manufacturer: Glock Model: 23 Action: Semi-automatic Type: Double Action Only Size: Compact Caliber: 40 S&W Barrel Length: 4.02" Frame/Material: Polymer Finish/Color: Matte Capacity: 13Rd Accessories: 2 Mags Fired Casing: Fired Case Hand: Right Hand Sights: Fixed Sights All handguns must go via AIR freight Only please select correct service

TAC-12 TCS

3/16 COBALT DRILL BIT

High quality US made Cobalt bit EZ to Drill out rivets when you do your conversion.

Ace Cheak riser

Ace cheak riser

ATI AT-47 Milled reciever

AK 47 ATI Milled Rifle , 762 x 39 semi auto , these rifles are built by ATI in the US based on imported parts kits with a new US Milled receiver. The have a 16 inch threaded barrel with removable slant style muzzle brake . Surplus red wood style furniture , 1- 75 round AK drum and 1- 30 round stick mag. The rifles are newly remanufactured using imported surplus parts kits and rated NRA excellent . This is a great affordable Milled rifle package and backed up by a 1 year warranty through ATI

Reciever conversion from Folding stock to collapse

6 Positions Tube Conversion For Under Folding Stock. Aluminum Made

GLOCK 22 GEN 4 40SW 4.5" FS

Glock If you are looking for a handgun with the ultimate in self defense and reliability, look no further than this Glock 22 Generation 4 Pistol. With your safety in mind, this Glock 22 Generation 4 Pistol has the "Safe Action" trigger system that uses a partially tensioned firing pin lock and a drop safety to prevent unintentional firing and the simple finger on trigger, safety off, finger off the trigger, safety on psychology. Designed to last, this Glock 22 Generation 4 Pistol has all parts coated in tenifer to give your firearm the additional hardness and longevity you want in a handgun. Safe, dependable and reliable, this Glock 22 Generation 4 Pistol is a favorite among law enforcement agencies and is sure to be your favorite too. Specifications Glock 22 Generation 4 Pistol Manufacturer Number: PG2250203 Configuration: Right Hand Action: Double Action Only Caliber: 40 S&W Capacity: 15 Round Features: Safe Action Trigger System: Partially Tensioned Firing Pin Lock Moves To Back Of Trigger Bar When Trigger Pulled Tenifer Coated Parts: Gives Hardness Close To That Of A Diamond Finger On Trigger: Safety Off Finger Off Trigger: Safety On Extractor Serves As Loaded Chamber Indicator Firing Pin Safety: Blocks Firing Pin Channel Making Igniting the Chambered Cartridge By The Firing Pin Impossible Drop Safety: Prevents Unintentional Fire If Glock Is Dropped Multiple Backstraps Reversible And Enlarged Magazine Release Catch Recoil Spring Assembly Barrel Length: 4.49 Inch Overall Length: 7.32 Inch Includes: (3) Magazines Glock Cleaning Rod Glock Cleaning Brush Glock Speedloader Cable Lock Fired Casing Instruction Manual Glock Hard Plastic Case Grips: Polymer Weight: 23 Ounces (Empty) Sights: Fixed Barrel Material: Cold Hammered, Tenifer Coated With Rounded Interior Profiles Frame Material: Polymer Finish: Black

Glock 21SF

Glock If you are looking for a handgun with the ultimate in self defense and reliability, look no further than this Glock 21SF (Short Frame) Pistol. With your safety in mind, this Glock 21SF (Short Frame) Pistol has the "Safe Action" trigger system that uses a partially tensioned firing pin lock and a drop safety to prevent unintentional firing and the simple finger on trigger, safety off, finger off the trigger, safety on psychology. Designed to last, this Glock 21SF (Short Frame) Pistol has all parts coated in tenifer to give your firearm the additional hardness and longevity you want in a handgun. Safe, dependable and reliable, this Glock 21SF (Short Frame) Pistol is a favorite among law enforcement agencies and is sure to be your favorite too. Specifications Glock 21SF (Short Frame) Pistol Manufacturer Number: P72150203 Configuration: Ambidextrous Action: Double Action Only Caliber: 45 ACP Capacity: 13 Round Features: Safe Action Trigger System: Partially Tensioned Firing Pin Lock Moves To Back Of Trigger Bar When Trigger Pulled Tenifer Coated Parts: Gives Hardness Close To That Of A Diamond Finger On Trigger: Safety Off Finger Off Trigger: Safety On Extractor Serves As Loaded Chamber Indicator Firing Pin Safety: Blocks Firing Pin Channel Making Igniting the Chambered Cartridge By The Firing Pin Impossible Drop Safety: Prevents Unintentional Fire If Glock Is Dropped Barrel Length: 4.6 Inch Overall Length: 7.59 Inch Includes: Glock Picatinny Rail (2) Magazines Glock Cleaning Rod Glock Cleaning Brush Glock Speedloader Cable Lock Fired Casing Instruction Manual Glock Hard Plastic Case Grips: Polymer Weight: 26.28 Ounces (Empty) Sights: Fixed Barrel Material: Cold Hammered, Tenifer Coated With Rounded Interior Profiles Frame Material: Polymer Finish: Matte

HK M704080

Using the common lineage of the USP and developed in conjunction with internationally renowned target shooters, the USP Expert achieves the highest levels of accuracy by combining features of the HK Tactical and Mark 23 pistols with a long slide design. The result is a USP ideally suited to IPSC (International Practical Shooting Competition) and other practical target shooting applications.

MAGPUL AFG ANGLED FORE-GRIP- BLACK

H&K friendly QUAD RAIL Chaos

AK REAR SIGHT RECEIVER RAIL SYSTEM

rear Peep Sight

Hogue Monogrip Pistol Grip for AK / Saiga - Black - Hogue

FSC30 Tactical Compensator

The FSC30 Tactical Compensator has all of the compensation of the standard DNTC308 compensator combined with enough flash suppression to keep the flash out of your optics and line of sight. This device has been classified as a non-flash suppressing device by the BATFE. See the document here. This unit is 2.75" in length, .900" in diameter and is threaded 5/8x24. We will be offering adapters for those with 1/2x28 threads. RH.

Spike's Tactical 37MM Rail Mount Launcher "Havoc"

H&K friendly QUAD RAIL Chaos

fg

fdg

Eric From Maryland

Tac47 kept in touch, advised me on some of my initial selections, and worked with me to avoid unnecessary delays... like a flash hider I had requested was not available so they upgraded me to a Chaos Warthog and barrel nut. Throughout, they represented their business partnerships with King Armory, Chaos, and others well. I felt their level of communication with me was appropriate and timely. The FFL transfer to my gunshop went easily. The process could only have been better if I could have gone in and worked with them on the conversion. It's too bad I don't have customers in Texas or I might have found an excuse to head out and do an AK course with them or Suarez. So, lets get into it. How is the Tac47 gun different from the gunshop gun? In no particular order... * It's a different color. I think Tac47 refinished the entire thing so that it not only looks flawless, but (specifically) the Izmash paint job that looks like some wino emptied a can of Rustoleum in the gun's general direction is all missing. To quote my wife, "It's beautiful." It's also more of a matte finish. The pictures probably don't show it, but there's a shade of earth tone in there. * Cosmetically, Tac47 also redid the rivets and pin holes. There is no wasted space and the overall result is a weapon that looks like it got some TLC. * The feel is unimaginably better. I knew that the conversion would do wonders over the sporting configuration and trigger/lever mess. But wow... what a difference! * The gun's balance is better. I'm going to attribute this to experienced hands knowing what they are doing. My first Saiga did not ever feel balanced, not even a little bit. * Tac47 checked out everything. There are numerous things that bugged me about my first. I went over all of them and found them completely missing in the TCS. An example? The 2.1 gas ports on my first Saiga are clear (and enlarged) ports on the TCS. * The bolt, carrier, and action... my first Saiga gave me the impression that these parts are made from recycled beer cans that got kicked around a junkyard. TCS? Not so at all. Like everything else, they've been smoothed up and refinished. Parts that stuck on my first Saiga are satiny smooth on the TCS.

Arsenal SGL20-41

SGL20-41 Details Manufacturer: Russia Description: Beat the Heat with this HOT Summer Sale! Was: $980.00 Sale price: $879.00 (You Save $101 OFF) (Offer good til August 14, 2009 12noon PST) SGL20 (Saiga) - Russian made stamped receiver, 7.62x39 caliber, front sight block with bayonet lug and 24x1.5 right-hand threads, muzzle brake, standard mil-spec. handguards with stainless steel heat shield and Warsaw length buttstock, 1000 meter rear sight leaf, scope rail. Comes with 30rd. magazine! SPECIFICATIONS: Caliber: 7.62 x 39 mm Total Length: 861 mm (33 7/8 in.) Barrel Length: 415 mm (16.3 in.) Rifling: 4 grooves Twist Rate: 1 in 240 mm (9.44 in.) Weight without Magazine: 3.24 kg (7.15 lbs.) Muzzle Velocity: 710 m/s (2,329 fps) Effective Range: 500 m (550 yds) Maximum Range: 1,350 m (1,480 yds) Rear Sight Range: 1000 m (1,094 yds)

Tromix Stock

Tromix Stock - Made in US.

Erogonomic Pistol Grip for AK47 or Galil

6 Position CBS Stock with Aluminum Tube for AK47 Stamped Receiver

Tony V

Very Cool Tony V.

Davids S ZKM

Here is my Saiga-12. I figured ... a 12-gauge semi-automatic shotgun based on the AK47 receiver, with 20-round drum magazines commercially available? What the heck, get one before they're banned! The factory configuration was a bit ho-hum, so I poured a bunch of money into it to make it suitably evil: * TAC-47 custom pistol-grip conversion work, including parkerizing, HK-style sights and folding Tromix buttstock * Chaos tri-rail * Blackheart International canted vertical grip adapter * Crimson Trace VF302M quick-detach vertical foregrip * DPH Phoenix claw door breach * MD Arms MD-20 drum magazine

Todd H.

What to do

Feel free to send pictures of you with your gun (or just your gun if you prefer), comments, and/or testimonies to be posted on our website. Please forward everything to cliff@tac47industries.com and it will be uploaded onto the site.

MaTech B.U.I.S. sight

The MATECH BUIS is a windage and elevation adjustable flip-up rear iron sight with a low-profile design. Elevation adjustable to 600 meters.

CTR Carbine Stock Mil Spec OD Green

C-MAG System M16 for M16/M4 .223 Black Backplate

Includes C-MAG Magazine M16, personal loader, Black pouch, Technical Manual and Graphite Tube. Ammunition not included.

AR57 Upper Reciever 11" Assembly "SBR"/Pistol 5.7x28

New Aero Precision AR57 5.7x28mm complete upper half for M16/AR-15 type pistols or short barreled rifles. This revolutionary design allows the use of 5.7x28mm ammunition on the AR15/M16 Platform. Simply attaches to AR15/M16 type Rifle/Pistol lower halves like any standard upper. Ejects through magazine well. Accepts PS90 magazines (up to 50rds!). Includes buffer. Complete assembly with "SBR/Pistol" 11" Barrel, Flash Suppressor, Bolt and "Carbine" Buffer. Magazine not included. All NFA rules apply.

AR15 M4 Quad Rail Handguard

Mfg. UTG Precision Machined with maximum strength Four Mil-Spec Picatinny rails for versatile accessory applications. Simple and Friendly installation, no gunsmithing or tool required. Solid locking features for most secure fit. Ultimate tactical solution to enhance accuracy under toughest environments. Fits Car/M4 lengths.. Hard Anodized finish for wear resistance.

AR15/M16 90rnd. Snail Drum

Specifications Magazine: 5.56 mm (.223 Rem) 90 Rounds Weight: Empty - 1.25 lbs. Loaded - 3.60 lbs. Length: 7.75" (Only 3/4" longer than the standard 30 rd. Magazine) Fits any rifle in the AR family. MADE IN THE USA

Black PMag Magpul Polymer 30rd .223 AR15/M16 PMAG Magazine

The PMAG (Polymer MAGazine) is a lightweight 5.56 NATO, M-16 compatible magazine. It features an advanced impact resistant polymer construction, a pop-off Impact Cover for storage, and an easy to dissasemble design with a flared floorplate for easy magazine extraction from pouches. PMAG utilizes a resilient stainless steel spring for corrosion resistance.

Egyptian Maddi AK-47 7.62 mag

This Magazines are awesome and their individual wrapped .. this is a rare find and supplies are limited.

H & K sight Option for conversion

This is to add the H&k Sights to your TAC conversion for The saiga series.

Yugoslavian AK Stock Adapter Block

Yugoslavian AK Stock Adapter Block. Fits Mitchell arms M70 and M90, as well as all other Yugo AK's with the original "no tang" stock interface ("rear trunion").

Robinson Armament VEPR Receiver Block

An ACE Exclusive! Robinson Armament VEPR Receiver Blocks are finally in! These VEPR receiver blocks have clearance machined in to it to fit the Krebs customized VEPR's (KTR). Will not fit early wooden thumb hole type VEPR's. This receiver block extends 1/8" (.125") from the back edge of receiver. Use this information to determine the over-all length of the stock needed to meet your requirements. Note: you must cut off the tang on the receiver to install this receiver block.

HK 94 Receiver Block

Heckler Koch 94 Receiver Block fits the HK 94 and MP5 variants only. Can be modified to fit other HK clones. Modification does void warranty. Use SMG Folding Stock Mechanism (#FSM-SMG) with sling mount for folding stock applications with this #HK94RB reciver block. Includes durable elastomer buffer. Any ACE Modular fixed or folding stock will mount to this receiver block. Length 3/8" Weight 90g (3.2 oz)

HK 93 Receiver Block

Heckler Koch 93 Receiver Block fits the HK 93 variants only. Can be modified to fit other HK clones. Modification does void warranty. Use SMG Folding Stock Mechanism (#FSM-SMG) with sling mount for folding stock applications with this #HK93RB receiver block. Made from injection molded Zytel polymer. Includes durable elastomer buffer. Any ACE Modular fixed or folding stock will mount to this receiver block. Length 3/8" Weight 90g (3.2 oz)

AK47 Conversion Kit - High End

AK47 Conversion Kit - Sophisticated. For stamped receivers The kit includes: ACAKC- 6 Position CBS Stock with Aluminum Tube for AK47 Stamped Receiver. UPG47- Ergonomic Pistol Grip for AK47 X47- 5-Rail Aluminum System for AK47/AK74

UPG47 Customizable Grip

6 piece interchangeable pistol grip for AK47 and similar type firearms. Grip incorporates multiple finger groove and palm swell inserts (3 each) allowing the user to customize their grip to fit all hand sizes for maximum comfort and control.

Top Rail Upper Handguard for AK47 or 74

Ergonomically designed with finger swell & backstrap Surfacing enhances grip & minimizes slippage when wet Beavertail for better control, higher & firmer hold Made from reinforced plastic composite LIFETIME WARRANTY

Folding Vertical Grip - Fits all Picatinny Rails

Vertical & Horizontal tactical grip, push button release converts grip from horizontal to vertical Ergonomic design Skeletonized for reduced weight Folds under so it is out of the way when not in use LIFETIME WARRANTY

Set of Upper and Lower Handguard with Rail for AK47 or 74

Mounts any Weaver or Picatinny Accessories. 2 mini forward Picatinny side rails and a full length Picatinny upper and lower rail set. Also sold separately as upper or lower rail. LIFETIME WARRANTY

Quick Detachable Vertical Grip

Designed as a quick detachable vertical grip, it features an internal waterproof storage compartment for up to three lithium 123 size batteries. The BVG Grip mounts on Picatinny and Weaver rails. The BVG is easily installed, or removed, by use of a internal threaded tension rod that securely positions the grip in your choice of location upon the rail. The batteries are secured inside the waterproof battery compartment utilizing a plug with an o-ring. This compact grip provides a comfortable feel in your hand and helps to prevent muzzle rise and provides waterproof storage of batteries for your optic or lighting systems.

Tri-Rail Lower Handguard for AK47 or 74

Compliant with MIL-STD 1913, this exceptional design allows you to fit any mission specific accessory such as forearm grip, bipod, flashlight and others, on any of the 3 Picatinny Rails attached to it. Expect an extremely rigid, yet ultra-light platform, which is compatible with most AK types available in the market. Made of a polymer, reinforced with fiberglass, for extra strength and heat-resistance. Fits most types of AK available in the market. LIFETIME WARRANTY

Top Rail Upper Handguard for AK47 or 74

Compliant with MIL-STD 1913, this exceptional design allows you to fit any Picatinny/Weaver attachment such as, flashlight and laser sight, on the top of your rifle. Expect an extremely rigid yet ultra-light platform, which is compatible with most AK types available in the market. Made of a polymer, reinforced with fiberglass, for extra strength and heat-resistance. LIFETIME WARRANTY

Ergonomic Vertical Grip (Fits all Picatinny Rails)

UltiMAK Multi Rail Forend System Model ACR2-SL Long Length

Clamp on Front Sight

Clamp on Front Sight Clamps rigidly to gas block. Shortens sight radius for rapid sight alignment. Note: you must use your windage stud from your existing sight. Or order the 105WS above. Precision machined from steel. Parkerized black Weight 55g. For AKS small gas block ( Romanian, Egyptian, Hungarian, Russian etc.) 104CS (E)..........$ 64.95 For AKM large gas block and early AK's ( Chinese, and most milled Bulgarian) 104CS (C)..........$64.95